Cel-Fi GO G51 is a robust 5G repeater offering up to 100 dB of signal boost to improve 3G, 4G and 5G cellular signals in large residential and medium-sized commercial spaces. It's the best 4G & 5G coverage improvement solution designed for Australian market and approved by ACMA for Telstra, Optus and Vodafone networks
This Cel-Fi G51 DIY pack comes with ready-made cables & adaptors. Just follow the installation guide below to set-up your device and start enjoying high speed internet & say bye to dropped call!
We provide Cel-Fi G51/G41 installation service nationwide. Need our assistance to survey, design and install G51 or G41 for your premises? Please contact us for a quote.
The Cel-Fi G32 Replacement AC Power Supplyis designed to ensure uninterrupted operation of your Cel-Fi GoX G32. This power supply is specifically crafted for Australian outlets, providing reliable and continuous power.
The Cel-Fi G32 Replacement DC Power Leadis a reliable and flexible power solution tailored for seamless connectivity with the Cel-Fi GoX Mobile - G32. This power lead ensures consistent and efficient power delivery via a 12V CLA (Cigarette Lighter Plug).
The X10DR XMPA Multi-Polarity Antenna Kit is designed for roof or rack mounting and delivers reliable performance for X10DR systems. It includes a 2 dBi antenna and a high-quality coaxial cable for optimal signal transmission.
The X10DR XCA-SDM Radio Cable is designed to suit Simoco SDM6000 GEN2 mobile radios. It provides the required connection for integrating X10DR systems with compatible Simoco radio models.
The PA174230-RP is a high-linearity solid state RF Power Amplifier (RF PA) for the VHF Band III DAB/DAB+ broadcasting band (174-230MHz). This model features dual power supply units for dual mains feed applications.
The DAB174230 series provides the rebroadcast of DAB and DAB+ VHF Band III (174-230 MHz) broadcast signals. They provide an RF output for connection to external RF power Amplifiers (PA174230 models) and are suited to single-bore, multi-bore or multi-zone tunnel, in-building and other rebroadcast applications. These units feature break-in audio message storage, audio break-in interface, and dry-relay and SNMP status monitoring and alarm outputs. The DAB174230-1 is configured for one ensemble rebroadcast and the DAB174230-2 for two ensembles rebroadcast. Multiple DAB174230 units can be implemented within a design to rebroadcast more than two ensembles when required.
DSPbR EDGE is a compact IP-rated wall, pole or 19"rack mountable, RF-transparent, digital channel selective repeater from RFI that is configurable to deliver coverage through in-building or in-tunnel Distributed Antenna Systems (DAS).
Available models:
450-470 MHz, Internal Duplexer, 90-264 VAC
MPN: DE-4043-0001-AC
400-430 MHz, Internal Duplexer, 90-264 VAC
MPN: DE-4547-0001-AC
Includes P25 Trunking Extender
Cel-Fi ROAM R41 is an advanced signal repeater from Nextivity and provides mobile coverage over a wide range of 4G & 5G frequency bands in the Australian market. This DIY kit comes with high class made-in-Australia antennas. Bracket sold separately. Click here to explore brackets.
R41 is approved by Telstra, Optus and Vodafone.
The DSPbR is a compact, 19" rack mountable, RF-transparent digital channelised repeater that is configurable to deliver large outdoor coverage footprints, or to act as a headend for large or small in-building or in-tunnel Distributed Antenna Systems (DAS). The DSPR's innovative plug'n'play modular design, compact size, and a feature-rich configurability make the DSPR series ideally suited for a wide range of outdoor, in-building, in-tunnel and other specialised rebroadcast and coverage enhancement applications.
The Cel-Fi Quatra Network Unitfor Optus and Vodafone (Q34-1/3/7/8NU_EXA) is the central hub of a powerful signal-boosting system designed to enhance Optus/Vodafone signals across multiple bands (1/3/5/7/8). This scalable unit seamlessly integrates with one to four Coverage Units, providing an expansive coverage area of up to 5,000 square meters.
The X10DR XMCH-O Open Face Headset is designed for use with motorcycle helmets, providing clear and reliable communication in mobile environments. Built for performance and comfort, it integrates seamlessly with X10DR systems.
The X10DR XPB-C14“After Hours"Power Bank is designed to provide reliable charging for X10DR handsets in vehicles where the battery is completely isolated when the vehicle is not operational. It ensures handsets remain charged and ready for deployment, even when the vehicle is off.
The X10DR XRTG-EX2 Elite Series Roof Top Gateway (GEN2) is designed to provide extended range and improved in-building coverage by relocating the gateway externally. This unique version of the Elite Gateway is housed in an IP55-rated weatherproof enclosure, making it ideal for roof, light rack, or similar external mounting.
The X10DR XCA-M26T Radio Cable is designed to suit Motorola 26 Pin MTM5400 Tetra mobile radios. It provides the necessary connection for integrating X10DR systems with compatible Motorola Tetra models.
The X10DR XCA-V25 Radio Cable is designed to suit Vertex DB25 VX5500 mobile radios. It provides the necessary connection for integrating X10DR systems with compatible Vertex radio models.
The X10DR XDCC-RJ Fused Power Cable is a 1.5-meter, 12 VDC cable designed to support mobile charger installations where additional power is required or no host mobile radio is connected.
The X10DR XIC-0.5 Shielded Interface Cable is a 0.5-meter, 6 mm diameter cable designed for short-run installations in X10DR systems. This black, male-to-male cable is included with each XEX2 Elite additional handset package.
The X10DR XIC-1.5 Shielded Interface Cable is a 1.5-meter, 6 mm diameter cable designed for use with X10DR systems. This black, male-to-male cable is included with every complete X10DR Secure Wireless Microphone package.
The X10DR XIC-6.2 Shielded Interface Cable is a 6.2-meter, 6 mm diameter cable designed for reliable connectivity in X10DR systems. This black, male-to-male cable is ideal for remote mounting applications.
The X10DR XJB Junction Box is designed to support the connection of up to six X10DR units. It is used with non-TDMA radios. It provides a centralized and organized solution for multi-device installations.
The X10DR XMAK Multi-Polarity Antenna Kit is specifically crafted and optimized for use with the X10DR Secure Wireless Microphone series. Designed for 2400-2500 MHz operation, it delivers reliable omni-directional performance in a compact and rugged form.
The X10DR-LTE-4P Power Microphone is designed to deliver powerful, clean audio and rugged reliability for professional users. Built for all-day operation, it combines ease of use with advanced functionality to meet the demands of modern communication environments.
The X10DR Acoustic Tube Earhook is part of the WPTEP series, designed to deliver a professional appearance along with high-quality performance. This earpiece is widely used across professional radio communication sectors and is built for comfort, clarity, and durability.
