Stay updated on tech trends, product launches and exclusive offers! Read our Policy Policy.
Cellular Components
Explore essential cellular components including splitters, couplers, and surge protectors. Designed to optimize signal systems and network infrastructure.
The PolyPhaser IS-B50LN-C2 Surge Protector is a high-performance RF surge protector designed to protect your equipment from lightning strikes and power surges. With a frequency range from 10 MHz to 1 GHz, this surge protector is suitable for a variety of applications, ensuring reliable protection for your devices.
These crossband couplers are ideal for low and medium power applications requiring 66-88 MHz or FM Broadcast 88-108 MHz to be combined with VHF Hiband 144-174 MHz. Typical applications include the combining or separating of signals for use with dual band mobile radios or antennas, or for signal distribution systems including Bi- Directional Amplifiers (BDAs) and Radiating Cable systems.
Pulse PSP6938-5102-N is a wideband 2-way reactive power divider, operating across the frequency range of 698-3800 MHz, with N female connectors for reliable signal distribution in RF applications.
The CommScope SG78-06B2A SureGround® Grounding Kit is designed for optimal grounding protection of 7/8" coaxial cables. Engineered with high-quality tinned copper components, this grounding kit safeguarding your RF and telecommunication infrastructure from electrical faults and lightning strikes.
The RFI SP0000-7230-SMA Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 30 dB. Designed for a frequency range of DC to 3 GHz and a power rating of 2W, this attenuator features SMA male and female connectors.
The Transtector ALPU-F140is an outdoor style surge protection device (SPD) that utilizes state-of-the-art SASD/GDT technology to protect critical equipment in Gigabit Ethernet/PoE++ protocol data networks while remaining transparent to data throughput. This surge protector provides effective protection against electrical transient surges generated by both external lightning events and internal switching events, ensuring long-term system reliability by absorbing high amounts of transient energy while maintaining a very low clamping voltage.
The Transtector 1100-558 AC Surge Protector is a plug-in style SPD designed to protect critical equipment operating on a 240 VAC single-phase electrical service. Utilizing state-of-the-art SASD technology, this surge protector ensures effective protection against electrical transient surges from both external lightning events and internal switching events.
RFI Power Dividers / Combiners are used in a variety of RF power dividing and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input, port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
The TP Series cavity combiners are ideally suited to combining multiple transmitters in analogue and digital communications systems. Unlike star' or parallel' harnessed cavity combiners, this user-friendly architecture provides a broadband solution allows services to be combined across the entire bandwidth of the antenna. The future expansion of the combiner can be easily performed in-the-field, without retuning or returning the combiner to the factory. The flexibility of the TP Series also caters for other combiner designs requiring multiple transmit, receive, and or transmit/receive frequencies operating in simplex, half duplex, or full duplex configurations. These may be implemented using either separate transmit and receive antennas, or single antenna systems.
The TP Series cavity combiners are ideally suited to combining multiple transmitters in analogue and digital communications systems. Unlike star' or parallel' harnessed cavity combiners, this user-friendly architecture provides a broadband solution allows services to be combined across the entire bandwidth of the antenna. The future expansion of the combiner can be easily performed in-the-field, without retuning or returning the combiner to the factory. The flexibility of the TP Series also caters for other combiner designs requiring multiple transmit, receive, and or transmit/receive frequencies operating in simplex, half duplex, or full duplex configurations. These may be implemented using either separate transmit and receive antennas, or single antenna systems.
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. These 50 Ohm terminations are specifically designed to terminate unused ports on low power devices (such as receiver distribution systems) and help ensure optimum shielding and the lowest system noise figures. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
Pulse PSP6938-5304-N Wideband 4-Way Wilkinson Splitter/Combiner is a versatile device that evenly splits RF input signals into four output ports. Pulse coaxial connectors and components have been used in quality radio infrastructure systems in Australia for decades.
These 3-way devices may be used in a range of RF signal splitting (divider) and combining applications and are designed to split RF source power into an equal ratio of power outputs, or combine multiple inputs to a single output with isolation between the ports. These products feature broad operating frequency bandwidth and multi-carrier PIM rating, and are widely used in Distributed Antenna Systems (DAS), receiver distribution networks and low-power RF signal dividing and combining designs. Their compact size, IP rating and ease of installation suits a wide range both indoor and outdoor deployments.
These 2-way devices may be used in a range of RF signal splitting (divider) and combining applications and are designed to split RF source power into an equal ratio of power outputs, or combine multiple inputs to a single output with isolation between the ports. These products feature broad operating frequency bandwidth and multi-carrier PIM rating, and are widely used in Distributed Antenna Systems (DAS), receiver distribution networks and low-power RF signal dividing and combining designs. Their compact size, IP rating and ease of installation suits a wide range both indoor and outdoor deployments.
These 3-way devices may be used in a range of RF signal splitting (divider) and combining applications and are designed to split RF source power into an equal ratio of power outputs, or combine multiple inputs to a single output with isolation between the ports. These products feature broad operating frequency bandwidth and multi-carrier PIM rating, and are widely used in Distributed Antenna Systems (DAS), receiver distribution networks and low-power RF signal dividing and combining designs. Their compact size, IP rating and ease of installation suits a wide range both indoor and outdoor deployments.
The TP Series cavity combiners are ideally suited to combining multiple transmitters in analogue and digital communications systems. Unlike star' or parallel' harnessed cavity combiners, this user-friendly architecture provides a broadband solution allows services to be combined across the entire bandwidth of the antenna. The future expansion of the combiner can be easily performed in-the-field, without retuning or returning the combiner to the factory. The flexibility of the TP Series also caters for other combiner designs requiring multiple transmit, receive, and or transmit/receive frequencies operating in simplex, half duplex, or full duplex configurations. These may be implemented using either separate transmit and receive antennas, or single antenna systems.
The TP Series cavity combiners are ideally suited to combining multiple transmitters in analogue and digital communications systems. Unlike star' or parallel' harnessed cavity combiners, this user-friendly architecture provides a broadband solution allows services to be combined across the entire bandwidth of the antenna. The future expansion of the combiner can be easily performed in-the-field, without retuning or returning the combiner to the factory. The flexibility of the TP Series also caters for other combiner designs requiring multiple transmit, receive, and or transmit/receive frequencies operating in simplex, half duplex, or full duplex configurations. These may be implemented using either separate transmit and receive antennas, or single antenna systems.
RFI's Splitter / Combiner products are used in a variety of RF power splitting and combining applications. Typically used in Multicoupling applications and DAS (Distributed Antenna Systems) for distributing power through feeder cable networks. RFI provide 2, 3 and 4 Way Splitter / Combiner options in the most popular frequency bands where input/ output port to port isolation is important as a design consideration.
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
RF Terminations are used to properly terminate active RF devices, coaxial cables, unused ports, multi-coupling devices and with test equipment.
RFI loads are normally horizontally mounted and air-cooled by unobstructed natural convection.
