Stay updated on tech trends, product launches and exclusive offers! Read our Policy Policy.
Crossband Coupler
A crossband coupler lets different frequency bands share one feeder run — for example VHF and UHF services up a single tower cable, split back out at the top. On sites where cable runs are long or tower space is tight, this halves the feeder cost without the loss of a simple splitter.
Each unit lists its band splits and isolation. Pair with quality coaxial feeder to keep the whole path clean.
These crossband couplers are ideal for low and medium power applications requiring 66-88 MHz or FM Broadcast 88-108 MHz to be combined with VHF Hiband 144-174 MHz. Typical applications include the combining or separating of signals for use with dual band mobile radios or antennas, or for signal distribution systems including Bi- Directional Amplifiers (BDAs) and Radiating Cable systems.
Crossband couplers allow the combining of multiple frequency bands onto shared coaxial and radiating cables and multi-band antennas. Models are available for specialised transmit and receive applications across the frequency range 0.5 - 2500 MHz and beyond. Cascading units can allow any number of different frequency bands to be combined together.
These crossband couplers are ideal for higher power applications requiring 66-88 MHz, FM Broadcast 88-108 MHz or VHF Hi band 132-174 MHz to be combined with UHF. Typicalapplications would be high power Multiband radiating cable scenarios or underground communications systems.
This Crossband Coupler is ideal for use in medium to high power applications requiring VHF 66-108 MHz and 140-180 MHz radio signals to either be combined or separated.
These crossband couplers are ideal for low and medium power applications requiring 66-88 MHz, FM Broadcast 88-108 MHz or VHF Hi band 132-174 MHz to be combined with UHF. Typical applications include the combining or separating of signals for use with dual-band mobile radios or antennas, or for signal distribution systems including Bi-Directional Amplifiers (BDAs) and Radiating Cable systems.
Crossband couplers allow the combining of multiple frequency bands onto shared coaxial and radiating cables and multi-band antennas. Models are available for specialised transmit and receive applications across the frequency range 0.5 - 2500 MHz and beyond. Cascading units can allow any number of different frequency bands to be combined together.
This crossband coupler may be used to separate VHF and UHF frequencies to or from a common RF path. Applications include connecting separate VHF and UHF antennas to a multi-band mobile two-way radio, or to combine VHF and UHF frequencies to broadband antennas or radiating cable (DAS) systems.
This Crossband Coupler is ideal for use in medium to high power applications requiring 66-235 MHz and UHF 350-530 MHz radio signals to either be combined or separated.
This Crossband Coupler is ideal for use in medium to high power applications requiring VHF 66-174 MHz and 200-235 MHz radio signals to either be combined or separated.
These crossband couplers are ideal for low and medium power applications utilising the aviation VHF band 118-145 MHz and UHF band 225-400 MHz. Typical applications include the combining or separating of signals for use with dual-band mobile radios or antennas, or for signal distribution systems including Bi-Directional Amplifiers (BDAs) and Radiating Cable systems.
This Crossband Coupler is ideal for use in low to medium power applications requiring VHF 25-175 MHz and UHF 330-960 MHz radio signals to either be Combined or Separated.
These couplers can also be operated as either a Low Pass or High Pass filter, by terminating one port with a low power 50 ohm load.
These crossband couplers are ideal for low and medium power applications requiring VHF, FM Broadcast or UHF signals to be combined with 700/800/900 MHz radio, Cellular or WLAN frequencies. Typical applications include the combining or separating of signals for use with signal distribution systems including Bi-Directional Amplifiers (BDAs) and Radiating Cable systems.
This Crossband Coupler is ideal for use in low to medium power VHF applications where there is requirement to co-site Airband radios along with Land Mobile 2way radios.
These crossband couplers are ideal for low and medium power applications requiring VHF/UHF signals to be combined with 700/800/900MHz Two-way radio, Cellular or WLAN frequencies. Typical applications include the combining or separating of signals for use with signal distribution systems including Bi-Directional Amplifiers (BDAs) and Distributed Antenna Systems (DAS).
