Pulse 3-port Directional Couplers offer a low-cost solution, covering cellular bands from 698 to 2700 MHz, with low loss and low Passive Inter-Modulation performance.
Pulse 4x4 Hybrid Coupler offers a low-cost solution for hybrid's covering cellular bands from 698 to 2700MHz, with low loss Passive Inter-Modulation performance and high isolation.
Note: Clearance Item - Available strictly while stocks last.
Pulse 2x2 Hybrid Coupler offers a low-cost solution for hybrid's covering cellular bands from 698 to 2700MHz, with low loss Passive Inter-Modulation performance and high isolation.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
CommScope VD-C10-CPUSE-N-A ValuDAS Air Directional Coupler is a high-performance RF coupler designed for indoor DAS and wireless signal distribution. This device comes with a 10 dB N(F) connector.
CommScope VD-C13-CPUSE-N-A ValuDAS Air Directional Coupler is a high-performance RF coupler designed for indoor DAS and wireless signal distribution. This device comes with a 13 dB N (F) connector.
CommScope VD-C15-CPUSE-N-A ValuDAS Air Directional Coupler is a high-performance RF coupler designed for indoor DAS and wireless signal distribution. This device comes with a 15 dB N(F) connector.
CommScope VD-C20-CPUSE-N-A ValuDAS Air Directional Coupler is a high-performance RF coupler designed for indoor DAS and wireless signal distribution. This device comes with a 20 dB N (F) connector.
CommScope VD-C6-CPUSE-N-A ValuDAS Air Directional Coupler is a high-performance RF coupler designed for indoor DAS and wireless signal distribution. This device comes with a 6 dB N (F) connector.
CommScope VD-C8-CPUSE-N-A ValuDAS Air Directional Coupler is a high-performance RF coupler designed for indoor DAS and wireless signal distribution. This device comes with an 8 dB N (F) connector.
CommScope VD-H2X2-CPUSE-N-A ValuDASâ„¢ Hybrid Coupler is engineered for in-building wireless systems, providing exceptional signal combining and splitting capabilities.
CommScope VD-H2X2-CPUSEW-43 ValuDAS Air Dielectric Hybrid Coupler is a compact and high-performance RF component designed for in-building wireless solutions.
The 4-Port 3dB Hybrid Coupler covers all cellular bands from 698-2700 MHz with a low Passive Inter-Modulation, high Peak Instantaneous Power and high environmental IP rating. Typically used to combine either in-band carriers or carriers across multiple bands to be fed into antenna feeders or In-Building leaky feeder or in-building Distributed Antenna Systems. Designed to IP67 the Hybrid Coupler can be used in both indoor and outdoor applications.
The 4-Port 3dB Hybrid Coupler covers all cellular bands from 698-3800MHz with a ultra low Passive Inter-Modulation, high Peak Instantaneous Power and high environmental IP rating. Typically used to combine either in-band carriers or carriers across multiple bands to be fed into antenna feeders or In-Building DAS or leaky feeder systems. Designed to IP67 the Hybrid Coupler can be used in both indoor and outdoor applications.
The 8-Port 3dB Hybrid Coupler covers all cellular bands from 698-3800MHz with a ultra low Passive Inter-Modulation, high Peak Instantaneous Power and high environmental IP rating. Typically used to combine either in-band carriers or carriers across multiple bands to be fed into antenna feeders or In-Building DAS or leaky feeder systems. Designed to IP67 the Hybrid Coupler can be used in both indoor and outdoor applications.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
