VHF & UHF
Explore VHF and UHF communication solutions including antennas, filters, amplifiers, and couplers. Ideal for broadcasting, emergency services, and industrial use.
Aussie Owned & Operated
Buy from your local business
Local support
We'll take care of you!
Free delivery over A$ 3,000*
Standard delivery, Australia only. Exceptions apply.
VHF & UHF - Complete collection
-
RFI RFI FO0005-1MHS-11-T Transmitter Tx1310nm, 0.5-2 MHz, No Modem, +12 VDC
RFI's RF over Fibre (RFoF) transceivers are available in either Tx-only, Rx-only or Tx/Rx configurations. They are a complete self-contained module consisting of a transmitter which converts the RF signal into an optical signal and/or a receiver which converts the optical signal back into RF. RF over Fibre facilitates the transportation of signals over long distances leveraging the lower loss of fibre cables compared to RF feeder cables.
$1,952.00
-
RFI RFI SP0000-7206-SMA Attenuator, 6 dB, DC-3 GHz, 2W, SMA Male/Female
The RFI SP0000-7206-SMA Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 6 dB. This attenuator features SMA male and female connectors and designed for a frequency range of DC to 3 GHz and a power rating of 2W.
$102.50
-
RFI RFI SP0000-7205-SMA Attenuator, 5 dB, DC-3 GHz, 2W, SMA Male/Female
The RFI SP0000-7205-SMA Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 5 dB. This attenuator features SMA male and female connectors and designed for a frequency range of DC to 3 GHz and a power rating of 2W.
$101.50
-
RFI RFI SP0000-7203-SMA Attenuator, 3 dB, DC-3 GHz, 2W, SMA Male/Female
The RFI SP0000-7203-SMA Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 3 dB. This attenuator features SMA male and female connectors and designed for a frequency range of DC to 3 GHz and a power rating of 2W.
$102.50
-
RFI RFI SP0000-7230-4.3 Attenuator, 30 dB, DC-4 GHz, 2W, 4.3-10 Male/Female
The RFI SP0000-7230-4.3 Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 30 dB. This attenuator features 4.3-10 male and female connectors and designed for a frequency range of DC to 4 GHz and a power rating of 2W.
$124.00
-
RFI RFI SP0000-7220-4.3 Attenuator, 20 dB, DC-4 GHz, 2W, 4.3-10 Male/Female
The RFI SP0000-7220-4.3 Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 20 dB. This attenuator features 4.3-10 male and female connectors and designed for a frequency range of DC to 4 GHz and a power rating of 2W.
$124.00
-
RFI RFI SP0000-7215-4.3 Attenuator, 15 dB, DC-4 GHz, 2W, 4.3-10 Male/Female
The RFI SP0000-7215-4.3 Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 15 dB. This attenuator features 4.3-10 male and female connectors and designed for a frequency range of DC to 4 GHz and a power rating of 2W.
$124.00
-
RFI RFI SP0000-7210-4.3 Attenuator, 10 dB, DC-4 GHz, 2W, 4.3-10 Male/Female
The RFI SP0000-7210-4.3 Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 10 dB. This attenuator features 4.3-10 male and female connectors and designed for a frequency range of DC to 4 GHz and a power rating of 2W.
$124.00
-
RFI RFI SP0000-7206-4.3 Attenuator, 6 dB, DC-4 GHz, 2W, 4.3-10 Male/Female
The RFI SP0000-7206-4.3 Attenuator is a high-quality 50 Ohm RF Coaxial In-Line Attenuator with a fixed attenuation value of 6 dB. This attenuator features 4.3-10 male and female connectors and designed for a frequency range of DC to 4 GHz and a power rating of 2W.
$124.00
-
RFI RFI SP1113-3106-11 VHF Aircraft Band Circulator, Broadband, 118-137 MHz
The SP1113-3106-11 is a broadband circulator suitable for use for the entire 118-137MHz VHF Aircraft frequency band. This circulator may be used to route transmit and receive signals in simplex transmit/receive combining systems, or it may have its Load port terminated with an appropriately rated 50ohm load to provide mismatch protection to transmitter output stages or for use with cavities in transmitter combiners to enhance Tx-Tx isolation and minimise the generation of intermodulation products.
$789.00
-
RFI RFI SP1723-3110-11 VHF/DAB/DAB+ Isolator, Broadband, 174-230 MHz
The SP1723-3110-11 is a broadband isolator suitable for use for the entire 174-230MHz VHF Band III frequency band. The VHF Band III frequency band is also used for DAB/DAB+ broadcast and rebroadcast applications. This isolator may be used to provide mismatch protection to transmitter output stages or for use with cavities in transmitter combiners to enhance Tx-Tx isolation and minimise the generation of intermodulation products.
$869.00
-
RFI RFI SP2240-3112-11 UHF Military Band Circulator, Broadband, 225-400 MHz
The SP2240-3112-11 is a broadband circulator suitable for use for the entire 225-400 UHF Military frequency band. This circulator may be used to route transmit and receive signals in simplex transmit/receive combining systems, or it may have its Load port terminated with an appropriately rated 50ohm load to provide mismatch protection to transmitter output stages or for use with cavities in transmitter combiners to enhance Tx-Tx isolation and minimise the generation of intermodulation products.
$1,598.00
-
RFI RFI SP0000-7042-12 Coaxial Stepped Attenuator, 0-42 dB, 5W
In applications where precise attenuation adjustable in 1 dB steps is required below 1 Watt, RFI has a very versatile 50 Ohm coaxial stepped attenuator that covers a wide frequency range between DC and 2.5 GHz with an input / output return loss of better than 18 dB. Used primarily in normalising amplifier gain in BDA’s, this stepped low power attenuator can be used in a number of applications where the attenuation adjustability is down to 1 dB within a wide attenuation range from 0 to 42 dBs.
$673.00
-
RFI RFI SP0000-6100-12 Termination Load, DC-2.5 GHz, 100W, N-Male
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
$579.00
-
RFI RFI SP0000-6060-12 Termination Load, DC-2.5 GHz, 60W, N-Male
RF Loads and Terminations are used to properly terminate active RF devices, coaxial cables, unused ports, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
$250.50
-
RFI RFI SP0000-6025-12 Termination Load, DC-2.5 GHz, 25W, N-Male
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
$185.00
-
RFI RFI SP0000-6010-12 Termination Load, DC-2.5 GHz, 10W, N-Male
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
$116.50
-
RFI RFI SP0000-6005-4.3 Termination Load, DC-3.8 GHz, 5W, 4.3-10-Male
RFI 4.3-10 RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 3800MHz, suitable for use in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments.
$93.20
-
RFI RFI SP0000-6005-12 Termination Load, DC-2.5 GHz, 5W, N-Male
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
$64.75
-
RFI RFI SP0000-6004-11 Short Circuit Termination, 800-1000, 0.25W, N-Male
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
$81.70
-
RFI RFI SP0000-6003-11 Short Circuit Termination, 30-520 MHz, N-Male
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
$21.20
-
RFI RFI SP0000-6002-12 Termination Load, DC-3.8 GHZ, 2W, N-Male
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
$56.25
-
RFI RFI SP0000-6001-15 Termination Load, DC-2.5 GHz, 1W, SMA-Male
RF Terminations are used to properly terminate active RF devices, coaxial cables, unused ports, multi-coupling devices and with test equipment. RFI loads are normally horizontally mounted and air-cooled by unobstructed natural convection.
$78.05
-
RFI RFI SP0000-6001-11 Termination Load, DC-1 GHz, 0.5W, BNC-Male
These 50 Ohm terminations are specifically designed to terminate unused ports on low power devices (such as receiver distribution systems) and help ensure optimum shielding and the lowest system noise figures.
$21.30
You have seen 312 out of 686 products