Panorama's LPBEM-6-60 antenna is a high-performance SISO antenna that supports 3G, 4G & 5G technologies across 617-960 MHz and 1710-6000 MHz frequency bands. Comes in black color, fitted with 2m RG174 flexible cable and SMA (M) termination.
This antenna offers ground-plane independent Omni-directional performance across global cellular and LTE bands, making it a versatile solution for any number of applications. The efficient element design ensures a high first-time connection rate and an ongoing, robust communications link even in problematic coverage areas.
Features:
Low profile, wall panel or enclosure mount
Mount by screw fixings or adhesive pad*
Supports 3G/4G, 698-960/1710-2700 MHz
*Performance may change based on the mounting surface.
The TRNCG antenna series is designed specifically for use on trains, trams, and buses underground, and over ground.
This antenna covers GSMR, 700 MHz LTE, 800 MHz TETRA, and trunking bands along with all cellular and GSM frequencies, 2.4 & 5.8 GHz WLAN, 2.6 GHz LTE, and WiMAX all in one housing. in versions with a GPS module, the module is protected by a gas discharge surge arrestor.
FEATRUES:
3G/4G/5G Cell LTE - also supports SISO WiFi 2.4/5 GHz on the same feed
The TRNMG MIMO antenna series is designed specifically for use on trains, trams, busses underground, and over-ground. It covers GSMR, 700 MHz LTE, 800 MHz TETRA, and trunking bands along with all cellular and GSM frequencies, 2.4 & 5.8 GHz WLAN, 2.6 GHz LTE, and WiMAX all in one housing.
Features:
2x2 MIMO Cell LTE
Standard 4 hold fixing
Approved to rail industry standards
The TRNMG antenna meets stringent industry standards including EN50155, EN45545-2 (HL1-3) EN50124-1 (25KA / 100ms), and ingress protected to IP69K when properly installed.
Panorama 4G/5G 2x2 MIMO Directional Antenna, 617 to 6000 MHz, 0.5m N Male incorporates two wideband element assemblies in a single housing and is designed to support fixed-site client devices.
This antenna offers a 6 dBi peak gain for 617- 960 MHz and a 9 dBi peak gain for 1710-6000 MHz. The weather-resistant housing is designed for wall or mast mounting with the supplied hardware.
The WMM2G-6-60-05NJ version has 50 cm length cables, fitted with N-type jacks, which is ideal for installations that require a longer cable run, where Panorama's CS240 or CS400 type coaxial cable can be used to minimize the cable insertion loss.
The WMM2G-6-60 is a value-added product for network operators and service providers by improving the link resilience to the router, achieving increased data rates for the subscriber, and resulting in customer satisfaction and retention.
The WMM4G-6-60 is a high directional gain 4x4 MiMo signal boosting antenna for 4G and 5G networks. Incorporating four separately fed wideband element assemblies in a single housing the WMM4G-6-60 is equipped to provide client-side MiMo support for 4G and 5G networks offering 6 dBi of peak gain at 617- 960 MHz and 9 dBi peak gain at 1710-6000 MHz.
Panorama 4G-5G Desk / Wall / Mast Mount MIMO Omni, 700 to 3800 MHz provides an innovative and Future Proof solution for 3G/4G and 3.4-3.8 GHz 5G networks.
Incorporating two separately fed, ultra-wideband elements in a single housing, it provides a client-side 2x2 MiMo antenna system for the networks of today and tomorrow. With between 2-5 dBi gain in the range 698-3800 MHz, the WMMG gives a great performance, whilst maintaining a wide beam pattern which is ideal for metro and urban areas.
The rugged, weatherproof housing is designed for wall or mast mounting and hardware is provided. A desk stand is also included to enable the antenna to be positioned on a window sill if preferred.
The antenna is supplied with an integral“twinned"CS29 coaxial cable. WMMG-7-38-5SP version has a 5m length, fitted with sma plug connectors for a simple plug & play' installation. WMMG-7-38-03NJ version has a 30 cm length, fitted with N socket connectors, which enables the use of lower loss cable types for longer runs.
The WMMG is a cost-effective value-added product for network operators and service providers ensuring a stable network connection with improved data rates for subscribers, improving satisfaction and retention.
Panorama 4G-5G Desk / Wall / Mast Mount MIMO Omni, 700 to 3800 MHz provides an innovative and Future Proof solution for 3G/4G and 3.4-3.8 GHz 5G networks.
Incorporating two separately fed, ultra-wideband elements in a single housing, it provides a client-side 2x2 MiMo antenna system for the networks of today and tomorrow. With between 2-5 dBi gain in the range 698-3800 MHz, the WMMG gives a great performance, whilst maintaining a wide beam pattern which is ideal for metro and urban areas.
The rugged, weatherproof housing is designed for wall or mast mounting and hardware is provided. A desk stand is also included to enable the antenna to be positioned on a window sill if preferred.
The antenna is supplied with an integral“twinned"CS29 coaxial cable. WMMG-7-38-5SP version has a 5m length, fitted with sma plug connectors for a simple plug & play' installation. WMMG-7-38-03NJ version has a 30 cm length, fitted with N socket connectors, which enables the use of lower loss cable types for longer runs.
The WMMG is a cost-effective value-added product for network operators and service providers ensuring a stable network connection with improved data rates for subscribers, improving satisfaction and retention.
The Plasmatronics Dingo USB Interface is a dedicated communication accessory designed to connect Dingo Regulator units to a PC or notebook. This interface enables users to monitor and configure their Dingo regulators through a computer, offering a simple and effective way to manage system performance.
The Plasmatronics PL20 PWM Solar Regulator is a reliable and programmable charge controller designed to manage solar power systems with precision and flexibility. It is designed to offer long-term reliability and performance in solar energy systems.
The Plasmatronics PL40 PWM Solar Regulator is a powerful and programmable charge controller designed to manage solar power systems with precision and flexibility. Supporting systems from 12V to 48V and handling up to 40A of current, it offers advanced control features and detailed performance monitoring through its integrated LCD display.
The Plasmatronics PL80e is a high-capacity solar charge controller designed for larger photovoltaic systems. With an 80A solar input rating and 40A load capacity, this intelligent controller is built to manage demanding solar setups with positive ground configurations.
The Plasmatronics PLA Alarm is a compact and functional accessory designed to enhance the performance and coordination of PL series solar regulators. It enables synchronization and communication between multiple regulators, making it ideal for systems with more than one controller.
The Plasmatronics PLD2020N Dingo is a highly versatile PWM solar regulator designed to offer advanced control and monitoring for solar energy systems. With a 20A charge and load current capacity and support for 12V to 48V systems, this negative ground controller is ideal for a wide range of applications.
The Plasmatronics Dingo RS232 Interface is a dedicated serial communication accessory designed for the Dingo regulator family. It enables seamless connectivity between a Dingo solar regulator and external devices such as modems or computers, enhancing system monitoring and control capabilities.
The Plasmatronics PLD4040P Dingo is a powerful and adaptable PWM solar regulator designed for advanced energy management in solar systems. With a 40A charge and load current capacity and support for 12V to 48V systems, this positive ground controller offers exceptional flexibility and control.
Plasmatronics PLDRC remote control makes it possible to remotely manage Plasmatronics Solar Charge Controller within a range of 100m. All of the functions work in the same way as on the actual controller on the Solar Charge Controller.
The Plasmatronics PLDSA Dingo Shunt Adaptor is a precision accessory designed to enhance the accuracy of battery monitoring in Dingo solar regulator systems. It enables the regulator to receive detailed current data from external shunts, improving the accuracy of battery state-of-charge (SOC) reporting.
The Plasmatronics PLDT is an adhesive battery temperature sensor designed specifically for the Dingo regulator family. Housed in a durable plastic casewith 3m cable link, this sensor helps improve charging accuracy by allowing the regulator to adjust based on real-time battery temperature readings.
The Plasmatronics PLDTB is a lugged battery temperature sensor designed for use with the Dingo regulator family. Featuring an M10 lug for secure connection with 3m cable link, this sensor provides accurate temperature readings directly from the battery terminal, enabling precise temperature-compensated charging.
The Plasmatronics PLI RS232 is a serial interface unit designed to connect PL series solar regulators to external devices via RS232 communication. It enables reliable data exchange between the regulator and a PC, modem, or other compatible equipment for monitoring and control.
Plasmatronics shunt adapter for PL series regulators suits the SH200 shunt. The PLS2 shunt adapter is designed for use with PL series solar charge controllers. It allows the controller to measure charge or load currents which do not go through the controller.
Note: The Amp-hour reading and SOC will not be meaningful unless ALL the currents in the system are measured.
The Plasmatronics PLTB is a bolt-on battery temperature sensor designed for use with PL series solar charge controllers. Featuring an M10 lug and a 3-meter link cable, this sensor provides accurate temperature readings directly from the battery terminal to support temperature-compensated charging.
