The 4-Port 3 dB Hybrid Coupler covers UHF PMR and cellular bands from 380-2700 MHz with a low Passive Inter- Modulation, high Peak Instantaneous Power and high environmental IP rating. Typically used to combine either in-band carriers or carriers across multiple bands to be fed into antenna feeders or In-Building leaky feeder or in-building Distributed Antenna Systems. Designed to IP65 the Hybrid Coupler can be used in both indoor and outdoor applications.
The 4-Port 3 dB Hybrid Coupler covers UHF PMR and cellular bands from 380-2700 MHz with a low Passive Inter- Modulation, high Peak Instantaneous Power and high environmental IP rating. Typically used to combine either in-band carriers or carriers across multiple bands to be fed into antenna feeders or In-Building leaky feeder or in-building Distributed Antenna Systems. Designed to IP65 the Hybrid Coupler can be used in both indoor and outdoor applications.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
The RFI SP3827-2305-4.3 Directional Coupler is a 3-port device with a 5 dB coupling value, designed for the 380-2700 MHz frequency range and capable of handling up to 200W of power with 4.3-10 female connector.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
The RFI SP3827-2306-4.3 Directional Coupler is a 3-port device with a 6 dB coupling value, designed for the 380-2700 MHz frequency range and capable of handling up to 200W of power. Featuring 4.3-10 female connectors, this coupler is an essential component for various RF applications, including combining, sampling, and power splitting.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
The RFI SP3827-2308-4.3 Directional Coupler is a 3-port device with an 8 dB coupling value, designed for the 380-2700 MHz frequency range and capable of handling up to 200W of power. Featuring 4.3-10 female connectors, this coupler is an essential component for various RF applications, including combining, sampling, and power splitting.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
The RFI SP3827-2310-4.3 Directional Coupler is a 3-port device with a 10 dB coupling value, designed for the 380-2700 MHz frequency range and capable of handling up to 200W of power. Featuring 4.3-10 female connectors, this coupler is an essential component for various RF applications, including combining, sampling, and power splitting.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
The RFI SP3827-2312-4.3 Directional Coupler is a 3-port device with a 12 dB coupling value, designed for the 380-2700 MHz frequency range and capable of handling up to 200W of power. Featuring 4.3-10 female connectors, this coupler is an essential component for various RF applications, including combining, sampling, and power splitting.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
The RFI SP3827-2315-4.3 Directional Coupler is a 3-port device with a 15 dB coupling value, designed for the 380-2700 MHz frequency range and capable of handling up to 200W of power. Featuring 4.3-10 female connectors, this coupler is an essential component for various RF applications, including combining, sampling, and power splitting.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
The RFI SP3827-2320-4.3 Directional Coupler is a 3-port device with a 20 dB coupling value, designed for the 380-2700 MHz frequency range and capable of handling up to 200W of power. Featuring 4.3-10 female connectors, this coupler is an essential component for various RF applications, including combining, sampling, and power splitting.
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
RFI 3-Port Multiband UHF and Cellular DAS Directional Couplers are used in a variety of RF combining, sampling and power splitting applications, typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and distributing power throughout feeder cable networks. Using directional couplers suitable for covering UHF to high end cellular frequencies saves on the cost of upgrades when public safety radio coverage may have to be accommodated on a DAS designed for cellular coverage. The RFI multiband directional couplers are available in a range of coupling values which gives the network designers and planners the ability to optimise and balance RF levels throughout a DAS network.
