Aussie Owned & Operated
Buy from your local business
Local support
We'll take care of you!
Free delivery over A$ 3,000*
Standard delivery, Australia only. Exceptions apply.
rfi - Complete collection
-
RFI RFI SP4054-5303-11 Power Splitter, 3-Way, 400-540 MHz, 100W, N-Female
RFI Power Dividers / Combiners are used in a variety of RF splitters and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input, port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
$183.00
-
RFI RFI SP4054-5304-11 Power Splitter, 4-Way, 400-540 MHz, 100W, N-Female
RFI Power Dividers / Combiners are used in a variety of RF splitter and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input, port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
$289.00
-
RFI RFI SP4345-3215-BI Dual Isolator, 430-450 MHz, Broadband
These broadband isolators are suitable for use across their entire UHF frequency sub-band without tuning. This isolator may be used to provide mismatch protection to transmitter output stages or for use with cavities in transmitter combiners to enhance Tx-Tx isolation and minimise the generation of intermodulation products.
$1,229.00
-
RFI RFI SP4547-3215-BI Dual Isolator, 450-470 MHz, Broadband
These broadband isolators are suitable for use across their entire UHF frequency sub-band without tuning. This isolator may be used to provide mismatch protection to transmitter output stages or for use with cavities in transmitter combiners to enhance Tx-Tx isolation and minimise the generation of intermodulation products.
$1,229.00
-
RFI RFI SP4750-3215-BI Dual Isolator, 470-500 MHz, Broadband
These broadband isolators are suitable for use across their entire UHF frequency sub-band without tuning. This isolator may be used to provide mismatch protection to transmitter output stages or for use with cavities in transmitter combiners to enhance Tx-Tx isolation and minimise the generation of intermodulation products.
$1,229.00
-
RFI RFI SP5052-3215-BI Dual Isolator, 500-520 MHz, Broadband
These broadband isolators are suitable for use across their entire UHF frequency sub-band without tuning. This isolator may be used to provide mismatch protection to transmitter output stages or for use with cavities in transmitter combiners to enhance Tx-Tx isolation and minimise the generation of intermodulation products.
$1,229.00
-
RFI RFI SP5800-5302-11 Splitter/Combiner, 2-Way, 5700-5800 MHz, N-Female
RFI's Splitter / Combiner products are used in a variety of RF power splitting and combining applications. Typically used in Multicoupling applications and DAS (Distributed Antenna Systems) for distributing power through feeder cable networks. RFI provide 2, 3 and 4 Way Splitter / Combiner options in the most popular frequency bands where input/ output port to port isolation is important as a design consideration.
$197.00
-
RFI RFI SP5800-5303-11 Splitter/Combiner, 3 Way, 5700-5800 MHz, N-Female
RFI's Splitter / Combiner products are used in a variety of RF power splitting and combining applications. Typically used in Multicoupling applications and DAS (Distributed Antenna Systems) for distributing power through feeder cable networks. RFI provide 2, 3 and 4 Way Splitter / Combiner options in the most popular frequency bands where input/ output port to port isolation is important as a design consideration.
$0.00
-
RFI RFI SP5800-5304-11 Splitter/Combiner, 4-Way, 5700-5800 MHz, N-Female
RFI's Splitter / Combiner products are used in a variety of RF power splitting and combining applications. Typically used in Multicoupling applications and DAS (Distributed Antenna Systems) for distributing power through feeder cable networks. RFI provide 2, 3 and 4 Way Splitter / Combiner options in the most popular frequency bands where input/ output port to port isolation is important as a design consideration.
$0.00
-
RFI RFI SP6927-2203-DIN Hybrid Coupler, 3 dB, 698-2700 MHz, DIN Type
The 4-Port 3dB Hybrid Coupler covers all cellular bands from 698-2700 MHz with a low Passive Inter-Modulation, high Peak Instantaneous Power and high environmental IP rating. Typically used to combine either in-band carriers or carriers across multiple bands to be fed into antenna feeders or In-Building leaky feeder or in-building Distributed Antenna Systems. Designed to IP67 the Hybrid Coupler can be used in both indoor and outdoor applications.
$396.50
-
RFI RFI SP6927-5302-11 Power Splitter, 2-Way, 698-2700 MHz, 50W
These 2-way devices may be used in a range of RF signal splitting (divider) and combining applications and are designed to split RF source power into an equal ratio of power outputs, or combine multiple inputs to a single output with isolation between the ports. These products feature broad operating frequency bandwidth and multi-carrier PIM rating, and are widely used in Distributed Antenna Systems (DAS), receiver distribution networks and low-power RF signal dividing and combining designs. Their compact size, IP rating and ease of installation suits a wide range both indoor and outdoor deployments.
$201.00
-
RFI RFI SP6927-5303-11 Power Splitter, 3-Way, 698-2700 MHz, 50W
These 3-way devices may be used in a range of RF signal splitting (divider) and combining applications and are designed to split RF source power into an equal ratio of power outputs, or combine multiple inputs to a single output with isolation between the ports. These products feature broad operating frequency bandwidth and multi-carrier PIM rating, and are widely used in Distributed Antenna Systems (DAS), receiver distribution networks and low-power RF signal dividing and combining designs. Their compact size, IP rating and ease of installation suits a wide range both indoor and outdoor deployments.
$251.00
-
RFI RFI SP6927-5304-11 Power Splitter, 4-Way, 698-2700 MHz, 50W
These 4-way devices may be used in a range of RF signal splitting (divider) and combining applications and are designed to split RF source power into an equal ratio of power outputs, or combine multiple inputs to a single output with isolation between the ports. These products feature broad operating frequency bandwidth and multi-carrier PIM rating, and are widely used in Distributed Antenna Systems (DAS), receiver distribution networks and low-power RF signal dividing and combining designs. Their compact size, IP rating and ease of installation suits a wide range both indoor and outdoor deployments.
$226.50
-
RFI RFI SP6938-1100-4.3 RF Cable Termination Loads, 4.3-10-Male
In multi-carrier systems where the risk of passive Inter-modulation is significantly increased, the components used should have a low PIM rating which includes termination loads. RFI have a wide range of Low PIM components for use in transmitter combining, POI and Distributed Antenna Systems.
$700.00
-
RFI RFI SP6938-2203-4.3 Hybrid Coupler, 4 Port, 3 dB, 694-3800 MHz, 300W, 4.3-10-Female
The 4-Port 3dB Hybrid Coupler covers all cellular bands from 698-3800MHz with a ultra low Passive Inter-Modulation, high Peak Instantaneous Power and high environmental IP rating. Typically used to combine either in-band carriers or carriers across multiple bands to be fed into antenna feeders or In-Building DAS or leaky feeder systems. Designed to IP67 the Hybrid Coupler can be used in both indoor and outdoor applications.
$237.00
-
RFI RFI SP6938-2206-4.3 Hybrid Coupler, 8 Port, 3 dB, 694-3800 MHz, 200W, 4.3-10-Female
The 8-Port 3dB Hybrid Coupler covers all cellular bands from 698-3800MHz with a ultra low Passive Inter-Modulation, high Peak Instantaneous Power and high environmental IP rating. Typically used to combine either in-band carriers or carriers across multiple bands to be fed into antenna feeders or In-Building DAS or leaky feeder systems. Designed to IP67 the Hybrid Coupler can be used in both indoor and outdoor applications.
$936.00
-
RFI RFI SP6938-2305-4.3 Directional Coupler, 3 Port, 5 dB, 694-3800 MHz, 200W, 4.3-10-Female
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
$126.00
-
RFI RFI SP6938-2306-4.3 Directional Coupler, 3 Port, 6 dB, 694-3800 MHz, 200W, 4.3-10-Female
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
$126.00
-
RFI RFI SP6938-2307-4.3 Directional Coupler, 3 Port, 7 dB, 694-3800 MHz, 200W, 4.3-10-Female
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
$126.00
-
RFI RFI SP6938-2308-4.3 Directional Coupler, 3 Port, 8 dB, 694-3800 MHz, 200W, 4.3-10-Female
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
$126.00
-
RFI RFI SP6938-2310-4.3 Directional Coupler, 3 Port, 10 dB, 694-3800 MHz, 200W, 4.3-10-Female
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
$126.00
-
RFI RFI SP6938-2312-4.3 Directional Coupler, 3 Port, 12 dB, 694-3800 MHz, 200W, 4.3-10-Female
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
$126.00
-
RFI RFI SP6938-2315-4.3 Directional Coupler, 3 Port, 15 dB, 694-3800 MHz, 200W, 4.3-10-Female
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
$126.00
-
RFI RFI SP6938-2320-4.3 Directional Coupler, 3 Port, 20 dB, 694-3800 MHz, 200W, 4.3-10-Female
RFI 3-Port Directional Couplers are used in a variety of RF combining, sampling and power splitting applications. Typically used in DAS (Distributed Antenna Systems) for sampling RF for fibre fed systems and or distributing power throughout feeder cable networks. RFI provide a wide product range of coupling values in the most popular frequency bands which enables optimised and balanced system levels.
$126.00
You have seen 1008 out of 1216 products