Subscribe to Techwave Spotlight
Stay updated on tech trends, product launches and exclusive offers! Read our Policy Policy.
How the Teltonika RUTX50 and RUTC50 5G routers and the Robustel R1510 4G router compare for an Australian site, vehicle or machine, with a decision table.
The short answer: For a new 5G job in Australia, buy the Teltonika RUTC50: a 5G modem rated to 3.4 Gbps down, Wi-Fi 6 to 2,402 Mbps, five Gigabit Ethernet ports, GNSS, two Mini SIM slots plus an eSIM on the current 21**** hardware version, a 9 to 50 V DC input and a -40 °C to 75 °C rating. The Teltonika RUTX50 is the same class of router one generation older (Wi-Fi 5, LTE Cat 20, no eSIM on the 0***** version), and Teltonika lists its end of ordering as 3 February 2027, so buy it only to match a fleet you already run. The Robustel R1510 is a different tool: a 4G LTE Cat 4 router with one Mini SIM, two 10/100 Mbps ports, 2.4 GHz Wi-Fi, no GNSS, a 9 to 36 V DC input, 1.5 W idle and 150 g, for the shed, cabinet or machine that needs one connection and one alarm contact. All three run under the ACMA's class licences once they carry the RCM, so the buyer needs no licence.
An industrial router is a cellular modem, a router and a small switch in one box that mounts on a DIN rail (the 35 mm rail inside electrical cabinets) or a wall, runs from a DC supply, and is managed from a cloud platform.
The Teltonika RUTX50 is a 5G router with a modem listed as "5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2)" and "4G LTE Cat 20" fallback, five Gigabit Ethernet ports, Wi-Fi 5, two Mini SIM slots and a GNSS receiver. SA and NSA are the two ways a 5G network can be built, standalone on a 5G core or non-standalone with 5G radio on a 4G core; the router does both. The same page carries an end-of-life notice: end of ordering 3 February 2027, end of production 3 August 2027, end of support 3 August 2032, with the RUTM50 and RUTC50 named as replacements.
The Teltonika RUTC50 is the newer unit. Its modem is "5G Sub-6 Ghz SA/NSA 2.4/3.4 Gbps DL (4x4 MIMO), 900/550 Mbps UL (2x2)" with "LTE Cat 19" fallback, so its 4G category is a step below the RUTX50 and its 5G peak a step above. It adds Wi-Fi 6, a dual-core 1.3 GHz processor, 1 GB of RAM and 8 GB of storage on the *1**** version, Docker support and an eSIM beside the two Mini SIM slots, and keeps the same ports, I/O, power input and temperature range as the RUTX50.
The Robustel R1510 is, in Robustel's words, "a compact industrial LTE Cat-4 router designed to provide reliable IP connectivity for space-constrained IoT deployments": one Mini SIM slot, two 10/100 Mbps ports, 2.4 GHz Wi-Fi, one digital input and one output, no GNSS, "Idle: 1.5 W@12 V, Max: 6 W@12 V", and 150 g in a plastic case.
| Model | Teltonika RUTX50 | Teltonika RUTC50 | Robustel R1510 |
|---|---|---|---|
| Cellular | 5G SA/NSA, 3.3 Gbps DL; LTE Cat 20 | 5G SA/NSA, 3.4 Gbps DL; LTE Cat 19 | 4G LTE Cat 4 |
| SIM | 2 x Mini SIM (eSIM on 32**** only) |
2 x Mini SIM + eSIM (21****) |
1 x Mini SIM |
| Ethernet | 5 x 10/100/1000 (1 WAN, 4 LAN) | 5 x 10/100/1000 (1 WAN, 4 LAN) | 2 x 10/100 (2 LAN or 1 LAN + 1 WAN) |
| Wi-Fi | Wi-Fi 5, 867 Mbps, 150 clients | Wi-Fi 6, 2,402 Mbps on 5 GHz, 512 clients | 802.11 b/g/n, 2.4 GHz only |
| GNSS | GPS, GLONASS, BeiDou, Galileo, QZSS | GPS, GLONASS, BeiDou, Galileo, QZSS | None |
| Digital I/O | 1 DI (8 to 30 V high), 1 DO (30 V, 300 mA) | 1 DI (8 to 50 V high), 1 DO (50 V, 300 mA) | 1 DI + 1 DO, wet contact (30 V, 20 mA) |
| Power | 9 to 50 V DC; idle under 4 W, max under 16.5 W | 9 to 50 V DC; idle under 4.5 W (*0****) or 5.6 W (*1****) |
9 to 36 V DC; idle 1.5 W, max 6 W at 12 V |
| Operating temperature | -40 °C to 75 °C | -40 °C to 75 °C | -25 °C to 75 °C |
| Size, weight, case | 132 x 44.2 x 95.1 mm, 533 g, aluminium | 130.4 x 42.6 x 103.4 mm, 452 g, aluminium | 31.5 x 91.5 x 91.5 mm, 150 g, plastic |
| Mounting | DIN rail, wall, flat surface (kit needed) | DIN rail, wall, flat surface (kit needed) | Desktop, wall, 35 mm DIN rail |
A band is a numbered slice of spectrum that a mobile network transmits in; a router only works on the bands its modem supports, and both makers sell different hardware versions by region. Two bands decide whether a router is right for Australia: band 28 at 700 MHz (B28 on 4G, n28 on 5G), the low band that reaches out of town, and n78 at 3.3 to 3.8 GHz, where the 5G capacity sits.
Teltonika lists the RUTX50 in two hardware versions for this region with identical band lists. For both the RUTX50 0***** (which names "Oceania") and the RUTX50 32**** ("EMEA, APAC, Brazil") the ordering tab reads "5G NR NSA: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78", the same list for 5G NR SA, "4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32", "4G (LTE-TDD): B38, B40, B41, B42, B43" and "3G: B1, B5, B8". The difference is the eSIM, which only the 32**** version carries. Both are listed with an Australian power supply, order codes RUTX50000200 and RUTX50320200.
The RUTC50 is listed in one hardware version, the RUTC50 21**** for "EMEA, APAC, Brazil" (APAC excluding China and Japan), with the eSIM, "5G NR: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n75, n76, n77, n78", the same 4G and 3G lists as the RUTX50, and an Australian power supply under order code RUTC50210300. The second digit after RUTC50 gives the memory version: 512 MB of RAM for "RUTC50 *0****" and 1 GB with 8 GB eMMC for "RUTC50 *1****", and Teltonika's interfaces line says the eSIM is "Optional - different hardware required", so confirm the version before you order if the eSIM matters.
Robustel's variants differ in bands, and the choice matters. The R1510-4L for "EMEA + SE Asia" lists "4G LTE FDD: B1/3/7/8/20/28A": no band 5, no band 40, and only 28A, the lower part of band 28. The R1510-4L for "ANZ + LATAM" lists "4G LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28", "4G LTE TDD: B40" and "3G: B1/B2/B5/B8", and its certification list includes the RCM. The ANZ unit carries Robustel B code B048703 (order code A004800713 for the bare router, A004800714 with antennas, a power adapter and a DIN rail kit), and the store's R1510 listing carries that code.
The table above is the specification grid; Figure 1 shows the three routers with the four facts under each that settle most purchases.

SIM slots. Both Teltonika units have two Mini SIM (2FF) slots and switch between them on triggers such as "weak signal", "no network" and "data connection fail". The R1510 has "1 x Mini SIM (2FF)", so if the site must stay up through one carrier's failure, it is the wrong choice.
Wi-Fi. The RUTC50's Wi-Fi 6 radio is rated to 2,402 Mbps on 5 GHz and 576 Mbps on 2.4 GHz with "Up to 512 simultaneous connections"; the RUTX50's Wi-Fi 5 radio to 867 Mbps with "Up to 150 simultaneous connections". The R1510's is 802.11 b/g/n on 2.4 GHz only.
GNSS. The Teltonika units receive "GPS, GLONASS, BeiDou, Galileo and QZSS", output NMEA 0183 and support geofencing. The R1510 has no GNSS receiver.
Digital input and output. On the Teltonika units the input reads "0 - 6 V detected as logic low" and logic high from 8 V up to 30 V (RUTX50) or 50 V (RUTC50); the output is an open collector rated at 300 mA. The R1510's input and output are wet contacts (they need a voltage supplied to them) rated at "+30 V DC" and "20 mA", so its output can signal a PLC input but cannot drive a relay coil.
Serial. None of the three has an RS-232 or RS-485 socket. The Teltonika units list "USB-to-serial" on their USB A port; Robustel's R1511 replaces the digital I/O with "1 x RS-232 OR 1 x RS-485 (Hardware configuration)".
Power. The Teltonika units take 9 to 50 V DC through a 4-pin socket, which covers 12 V and 24 V vehicle and solar systems and 48 V plants, and accept passive PoE on LAN1 (not IEEE 802.3af/at). The R1510 takes "12/24 V DC, 9 ~ 36 V DC" through a 2-pin socket. On a battery, the R1510's 1.5 W idle against under 4 W (RUTX50) and under 4.5 W or 5.6 W (RUTC50) decides the panel size.
RUTC50: the general-purpose 5G router. With 512 Wi-Fi clients, four Gigabit LAN ports and a 5G modem rated to 3.4 Gbps, it covers a site office, a shop or a small depot without a separate access point or switch. The GNSS receiver, the -40 °C rating, the 9 to 50 V DC input and the E-mark documents Teltonika publishes for it make it the vehicle choice too. It runs RutOS, an "OpenWrt based Linux OS", with OpenVPN, IPsec and WireGuard, and a TPM 2.0 security chip.
RUTX50: the same job, one generation back. It has the higher 4G category (Cat 20 against Cat 19) and the same band list, so on 4G-only sites it gives nothing away. What it lacks is Wi-Fi 6, the eSIM on the 0***** version, memory (256 MB of RAM) and a future: with end of ordering on 3 February 2027, a fleet standardised on it should plan its next unit as a RUTC50. Units bought now are supported until 3 August 2032, so topping up an existing fleet is still a sound buy.
R1510: the small single link. Robustel's own use cases for it are kiosks, retail continuity and ticketing: one device, one SIM, one or two Ethernet drops. Its strengths are its size, its 1.5 W idle draw, "IPsec, OpenVPN, GRE, WireGuard" tunnels, a built-in watchdog, and RobustVPN, which "uses OpenVPN to present a fixed IP on any SIM", so a camera or a PLC needs no carrier static-IP plan.
The pattern across the five jobs below is simple: the Robustel R1510 for the small single-SIM jobs, the Teltonika RUTC50 for anything that needs 5G, GNSS, Wi-Fi 6 or a second SIM.
| Use case | Router | Why |
|---|---|---|
| A shed with one camera | Robustel R1510 (ANZ variant, B048703) | Cat 4 carries a camera stream with margin; 9 to 36 V DC and 1.5 W idle suit a 12 V battery and a small panel. One SIM is enough when the camera is not safety-critical. |
| A vehicle fleet | Teltonika RUTC50 | GNSS with NMEA output and geofencing, 9 to 50 V DC for 12 V and 24 V vehicles, -40 °C to 75 °C, a second SIM for long routes, and E-mark documents on Teltonika's wiki. The R1510 has no GNSS. |
| A site office with 20 users | Teltonika RUTC50 | Wi-Fi 6 to 2,402 Mbps and 512 clients, four Gigabit LAN ports, and a Gigabit WAN port so the office can move to fibre later and keep 5G as backup. The RUTX50 does this with Wi-Fi 5 and 150 clients. |
| A pump station with alarms | Robustel R1510 for a dry-contact alarm and a PLC on Ethernet; Teltonika RUTC50 if the site needs DNP3, a second SIM or an output that drives a relay | The R1510's input takes the alarm, its output (30 V, 20 mA) signals a PLC input, and it draws 1.5 W on solar. The RUTC50's output handles 300 mA, and RutOS speaks Modbus TCP, DNP3, OPC UA and BACnet. |
| A 5G backhaul for a small office | Teltonika RUTC50 | 5G SA/NSA modem to 3.4 Gbps on n78 and n28, Gigabit ports so the modem is not throttled, failover between two SIMs and a wired WAN, and RMS for access without a public IP. The R1510's 10/100 ports cannot carry a 5G service. |
Teltonika's Remote Management System (RMS) gives "Complete remote control over all connected Teltonika Networks compatible devices even without a public IP". That last clause is the point: carriers put most SIMs behind carrier-grade NAT, so the router has no address you can reach from the internet, and RMS reaches it through a connection the router keeps open. RMS covers configuration and firmware updates for groups of devices, alerts, and remote access to the router and the devices behind it, with "a 30-day trial period for every new device" and per-device licensing after that.
Robustel Cloud Manager Service (RCMS) does the equivalent job for Robustel hardware: fleet monitoring with alerts, configuration and signed firmware updates pushed to one unit or the fleet, and remote sessions. Robustel's page says "anyone with a Robustel device can create a free account for basic monitoring, then unlock advanced functionality whenever you need it". Both are built into the firmware, and all three routers also support SNMP and TR-069.
None of the three needs a radio licence from the buyer. A 4G or 5G router is customer equipment on a public mobile network, and the Radiocommunications (Cellular Mobile Telecommunications Devices) Class Licence 2024 "authorises a person to operate a radiocommunications device to communicate with a PTS device" (a PTS device is the carrier's licensed base station). The Wi-Fi radio is covered by the Radiocommunications (Low Interference Potential Devices) Class Licence 2025, in force since 1 October 2025, whose Table 8 allows digital modulation transmitters in 2400 to 2483.5 MHz at up to 4 W EIRP and radio local area network transmitters in the 5 GHz segments at 200 mW to 1 W. The condition that bites is section 11 of the cellular class licence: the device must not be operated unless the manufacturer or importer has met the labelling requirements, which means the unit carries the RCM and sits on a responsible supplier's records. Teltonika publishes an Australian proof-of-compliance document for the RUTX50 and the RUTC50 on its wiki, and Robustel lists the RCM against the ANZ variant of the R1510. If you import units yourself, that becomes your job: the ACMA import checklist for routers, radios and IoT devices walks through it. Techwave is an EESS responsible supplier and an ACMA accredited person.
0*****, RUTX50 32**** or RUTC50 21****) and ends with the power supply (0200 for the Australian RUTX50 supply, 0300 for the RUTC50). For Robustel, insist on the ANZ variant, B code B048703, not the EMEA unit with B28A only.The RUTC50 is the newer router: Wi-Fi 6 (2,402 Mbps, 512 clients) against Wi-Fi 5 (867 Mbps, 150 clients), a 5G modem rated to 3.4 Gbps against 3.3 Gbps, an eSIM on the current hardware version, more memory and Docker support. The RUTX50 keeps a higher 4G category (Cat 20 against Cat 19) and the same band list, but Teltonika has set its end of ordering at 3 February 2027.
No. Robustel's specification lists "1 x Mini SIM (2FF)", and the serial-port sibling R1511 is single SIM as well. If you need two SIMs, choose a Teltonika RUTX50 or RUTC50, or one of Robustel's larger routers.
Yes on the RUTC50 21**** hardware version, the one in Teltonika's current ordering table with the Australian power supply (RUTC50210300). Teltonika describes it as a "Consumer type eSIM" holding up to 7 profiles that "does not include data plans", so you still need a carrier that issues eSIM profiles for data devices. On other hardware versions the eSIM needs different hardware, so check the order code.
No. The cellular side is authorised by the Radiocommunications (Cellular Mobile Telecommunications Devices) Class Licence 2024 and the Wi-Fi side by the Radiocommunications (Low Interference Potential Devices) Class Licence 2025, on condition that the device carries the RCM, which is the supplier's responsibility.
All three, on the versions sold here: the Teltonika RUTX50 and RUTC50 list B28 for 4G and n28 for 5G, and the Robustel R1510 ANZ variant (B048703) lists B28. The Robustel EMEA variant lists only B28A, so it is not the one to import. Only the two Teltonika units have n78, the 3.5 GHz 5G band.
The Techwave Store carries the Teltonika RUTC50, the Teltonika RUTX50 and the Robustel R1510 ANZ variant, with the mounting kits, antennas and power supplies in the Teltonika and Robustel collections. If the job does not fit one of the five rows above, send us the site, the supply voltage and the number of devices and we will match a router to it.
The datasheets and product pages linked in this article were read on 1 November 2026; specifications change, so check the current datasheet before you order.