The Plasmatronics PLTB is a bolt-on battery temperature sensor designed for use with PL series solar charge controllers. Featuring an M10 lug and a 3-meter link cable, this sensor provides accurate temperature readings directly from the battery terminal to support temperature-compensated charging.
The Plasmatronics PL80e is a high-capacity solar charge controller designed for larger photovoltaic systems. With an 80A solar input rating and 40A load capacity, this intelligent controller is built to manage demanding solar setups with positive ground configurations.
The Plasmatronics PR1210L is a simple and reliable PWM solar regulator designed for charging sealed or gel lead-acid batteries. With a 10A current rating and 12V system compatibility, it offers a basic two-stage charging process ideal for small-scale solar applications.
The Plasmatronics PLDT is an adhesive battery temperature sensor designed specifically for the Dingo regulator family. Housed in a durable plastic casewith 3m cable link, this sensor helps improve charging accuracy by allowing the regulator to adjust based on real-time battery temperature readings.
Plasmatronics shunt adapter for PL series regulators suits the SH200 shunt. The PLS2 shunt adapter is designed for use with PL series solar charge controllers. It allows the controller to measure charge or load currents which do not go through the controller.
Note: The Amp-hour reading and SOC will not be meaningful unless ALL the currents in the system are measured.
The Plasmatronics PR2410L is a simple and robust PWM solar regulator designed for charging sealed or gel lead-acid batteries. With a 10A current rating and 24V system compatibility, it offers a basic two-stage charging process along with load control, making it ideal for small to medium-sized solar systems.
The Plasmatronics PR2410 is a basic and dependable PWM solar regulator designed for charging wet or flooded lead-acid batteries. With a 10A current rating and 24V system compatibility, it provides a simple two-stage charging solution for small to medium-sized solar setups.
The Plasmatronics PR1210 is a basic yet reliable PWM solar regulator designed specifically for charging liquid electrolyte lead-acid (flooded) batteries. With a 10A current rating and 12V system compatibility, it offers a simple and effective solution for small-scale solar charging applications.
The Plasmatronics PLW is a dedicated PV solar hot water controller designed for both off-grid and grid-boosted systems. It offers a complete and efficient solution for solar water heating without the need for batteries, pumps, or frost protection devices, making it a low-maintenance and reliable choice.
The Plasmatronics PLI RS232 is a serial interface unit designed to connect PL series solar regulators to external devices via RS232 communication. It enables reliable data exchange between the regulator and a PC, modem, or other compatible equipment for monitoring and control.
The Plasmatronics Dingo USB Interface is a dedicated communication accessory designed to connect Dingo Regulator units to a PC or notebook. This interface enables users to monitor and configure their Dingo regulators through a computer, offering a simple and effective way to manage system performance.
The Plasmatronics PLDTB is a lugged battery temperature sensor designed for use with the Dingo regulator family. Featuring an M10 lug for secure connection with 3m cable link, this sensor provides accurate temperature readings directly from the battery terminal, enabling precise temperature-compensated charging.
The Plasmatronics PLDSA Dingo Shunt Adaptor is a precision accessory designed to enhance the accuracy of battery monitoring in Dingo solar regulator systems. It enables the regulator to receive detailed current data from external shunts, improving the accuracy of battery state-of-charge (SOC) reporting.
Plasmatronics PLDRC remote control makes it possible to remotely manage Plasmatronics Solar Charge Controller within a range of 100m. All of the functions work in the same way as on the actual controller on the Solar Charge Controller.
The Plasmatronics PLD4040P Dingo is a powerful and adaptable PWM solar regulator designed for advanced energy management in solar systems. With a 40A charge and load current capacity and support for 12V to 48V systems, this positive ground controller offers exceptional flexibility and control.
The Plasmatronics Dingo RS232 Interface is a dedicated serial communication accessory designed for the Dingo regulator family. It enables seamless connectivity between a Dingo solar regulator and external devices such as modems or computers, enhancing system monitoring and control capabilities.
The Plasmatronics PLD2020N Dingo is a highly versatile PWM solar regulator designed to offer advanced control and monitoring for solar energy systems. With a 20A charge and load current capacity and support for 12V to 48V systems, this negative ground controller is ideal for a wide range of applications.
The Plasmatronics PLA Alarm is a compact and functional accessory designed to enhance the performance and coordination of PL series solar regulators. It enables synchronization and communication between multiple regulators, making it ideal for systems with more than one controller.
The Plasmatronics PL40 PWM Solar Regulator is a powerful and programmable charge controller designed to manage solar power systems with precision and flexibility. Supporting systems from 12V to 48V and handling up to 40A of current, it offers advanced control features and detailed performance monitoring through its integrated LCD display.
The Plasmatronics PL20 PWM Solar Regulator is a reliable and programmable charge controller designed to manage solar power systems with precision and flexibility. It is designed to offer long-term reliability and performance in solar energy systems.
