Subscribe to Techwave Spotlight
Stay updated on tech trends, product launches and exclusive offers! Read our Policy Policy.
Every Teltonika family explained: 4G and 5G routers, gateways, modems, ports, RMS licences, RCM compliance and eight worked projects with antennas.
Teltonika Networks makes industrial 4G and 5G routers, gateways, modems, switches and access points in Lithuania, and one cloud platform, RMS, that manages all of them. A router shares a mobile connection with a whole site, a gateway connects one machine, and a modem adds mobile data to a computer. Pick the family by the job, the model by the radio and the ports, and budget for the antenna and the RMS licence at the same time as the hardware. This guide explains every family, what each port is for, how RMS is licensed, what the compliance paperwork covers in Australia and New Zealand, and eight projects drawn out with the router, the ports used and the antenna.
Family by the job. Model by the radio and the ports. Antenna and RMS in the same quote.
If you only need to choose between two or three 5G routers, our shorter article Teltonika RUTX50, RUTC50 or Robustel R1510 does that. For the antenna on its own, see Choosing a 4G/5G antenna in Australia.
Teltonika Networks is the networking company of the Teltonika IoT Group, founded in Lithuania in 1998. The group designs its products in Lithuania and builds them in its own factories there. Its own description names two plants, Vilnius and Molėtai, run by its manufacturing arm, Teltonika EMS. Lithuania's national broadcaster toured the Molėtai plant in 2024 and reported that the network equipment, the 4G and 5G routers and switches, is made there.
That matters to a buyer for three reasons.
A Teltonika model number is a family code and a number. The family tells you the job. Learn the codes and the catalogue stops looking like alphabet soup.

| Family | What it is | Typical job |
|---|---|---|
| RUT | Compact routers: 4G, 5G RedCap and Ethernet-only | One cabinet, one machine room, one vehicle |
| RUTX | Performance routers with Gigabit Ethernet | A site with several devices, cameras or users |
| RUTM | The current generation of 4G and 5G routers | New projects that will run for years |
| RUTC | Routers with Wi-Fi 6 and more memory | Many Wi-Fi users, heavier software on the router |
| OTD | Outdoor routers with PoE | A pole or wall, close to the antenna |
| TRB | Gateways | One device to connect: Ethernet, serial or inputs and outputs |
| TRM | USB modems | Mobile data for a PC, a kiosk or another router |
| TSW, TSF | Ethernet switches | More ports, PoE for cameras and access points |
| TAP | Access points | Wi-Fi coverage away from the router |
| EBG, EBD | Embedded boards | Connectivity built into another maker's product |
These are the routers that go inside cabinets. They have 10/100 Ethernet ports, which is ample for telemetry, payments and remote access, and a mobile radio sized for the job rather than for speed tests.
| Model | Mobile | Ethernet | Wi-Fi | Serial, inputs and outputs | Choose it when |
|---|---|---|---|---|---|
| RUT200 | 4G Cat 4 | 2 ports | Yes | None listed | You need the smallest, simplest 4G router |
| RUT241 | 4G Cat 4, 1 SIM plus eSIM profiles | 2 ports | Yes | 1 digital input, 1 digital output | One machine, and you may change carrier later |
| RUT206 | 4G Cat 4 | PoE in | Not listed | RS232 and RS485 | A serial device powered over the Ethernet cable |
| RUT901 | 4G Cat 4, dual SIM | Yes | Yes | Modbus TCP, MQTT, DNP3 | Dual SIM without serial ports |
| RUT906 | 4G Cat 4, dual SIM | Yes | Not listed | RS232, RS485, inputs and outputs, GNSS | Building and plant equipment: BACnet, OPC UA |
| RUT951 | 4G Cat 4, dual SIM | 4 ports | Yes | 1 digital input, 1 digital output | Several Ethernet devices and two carriers |
| RUT956 | 4G Cat 4, dual SIM | 4 ports | Yes | RS232, RS485, inputs and outputs, GNSS, USB | The industrial all-rounder: PLCs, vehicles, pumps |
| RUT361 | 4G Cat 6, up to 300 Mbps | Yes | Yes | Not listed | More 4G speed in the small housing |
The RUT241 deserves a note. Teltonika's page lists one physical SIM plus up to seven eSIM profiles, so a fleet can move to another carrier without anyone opening a cabinet. The RUT956 turns up again and again in Teltonika's Australian material: its own advice on replacing 3G equipment points agriculture, ticket machines, passenger counting and vehicle tracking to it, and two of the Australian projects below run on it.
Gigabit Ethernet, faster 4G through carrier aggregation, and on most models dual-band Wi-Fi 5. These are for sites, not single machines.
| Model | Mobile | Ethernet | Wi-Fi | Extras | Choose it when |
|---|---|---|---|---|---|
| RUTX09 | 4G Cat 6, 300 Mbps, dual SIM | 4 Gigabit | None listed | GNSS, up to 128 VLANs | A wired site with a 4G backup or primary link |
| RUTX11 | 4G Cat 6, 300 Mbps, dual SIM | 4 Gigabit | Wi-Fi 5 | Bluetooth LE, EN 45545-2 for rail | Vehicles and sites that need Wi-Fi as well |
| RUTM11 | 4G Cat 6, 300 Mbps, dual SIM | 4 Gigabit | Wi-Fi 5 | GNSS | The current-generation RUTX11 slot |
| RUTX12 | Two 4G Cat 6 modems, 600 Mbps combined | 5 Gigabit | Wi-Fi 5 | Bluetooth LE, USB, load balancing | Two carriers at the same time |
| RUTX14 | 4G Cat 12, 600 Mbps down, 150 up | 5 Gigabit | Wi-Fi 5 | Bluetooth LE | The fastest 4G-only router in this table |
| RUTXR1 | 4G Cat 6, 300 Mbps, dual SIM | Gigabit plus SFP | Wi-Fi 5 | Rack mount, two power supplies, console ports | A comms rack that needs a 4G path beside the fibre |
The RUTX12 is different in kind, not just in speed. It holds two modems that are both connected at once, so it can balance traffic across two carriers or keep a live session alive when one drops. A dual SIM router with one modem switches between carriers; the RUTX12 uses both.
Every 5G router here supports both kinds of 5G network, standalone (SA) and non-standalone (NSA), and falls back to fast 4G where there is no 5G.
| Model | Mobile | Ethernet | Wi-Fi | Extras | Choose it when |
|---|---|---|---|---|---|
| RUTX50 | 5G up to 3.3 Gbps, 4G Cat 20 fallback, dual SIM | 5 Gigabit | Dual band | 9 to 50 V DC | The proven 5G all-rounder |
| RUTC50 | 5G up to 3.4 Gbps, dual SIM plus eSIM | 5 Gigabit | Wi-Fi 6 | 1 GB RAM, 8 GB flash | Many Wi-Fi users, or software running on the router |
| RUTM55 | 5G up to 3.4 Gbps, dual SIM plus eSIM | 4 Gigabit | Wi-Fi 5 | RS232, RS485, isolated inputs, analog input, relay output | 5G in a control panel: the RUT956 of 5G |
| RUTM50 | 5G up to 3.4 Gbps, 4G Cat 19 fallback, dual SIM | Gigabit | Yes | Modbus, MQTT, OPC UA | The current-generation RUTX50 slot |
| RUTM51 | 5G, 4G Cat 12 fallback, dual SIM | 5 Gigabit | Dual band | Multi-network | 5G where top speed is not the point |
| RUTM54 | 5G up to 3.4 Gbps, dual SIM plus eSIM | 5 Gigabit | Dual band | Telit modem | A second modem source for the same design |
| RUTM52 | Two 5G modems, dual SIM plus eSIM | 5 Gigabit | Wi-Fi 5 | Multi-WAN load balancing | Two 5G carriers at the same time |
| RUTM30 | 5G, 4G Cat 19 fallback, dual SIM with eSIM | 2 Gigabit | Dual band | Compact | 5G for one or two devices |
| RUT976 | 5G RedCap (SA), 4G Cat 4 fallback, dual SIM | 4 ports | Yes | RS232, RS485, inputs and outputs, GNSS | A long-life replacement for 4G Cat 4 telemetry |
| OTD500 | 5G, 4G Cat 19 fallback, dual SIM plus eSIM | Gigabit, PoE in and PoE out | None listed | IP55 outdoor housing | The router goes up the pole with the antenna |
RedCap needs a sentence, because it will matter for the next ten years of telemetry. RedCap ("reduced capability") is a lighter kind of 5G made for devices that never needed hundreds of megabits. The RUT271 and RUT976 are RedCap routers that work on standalone 5G networks and fall back to 4G Cat 4. They are the natural successors to today's Cat 4 routers for sensors, meters and controllers. Check with your carrier that RedCap is live where you plan to install before you standardise on it.
No mobile radio at all. These put Teltonika's firewall, VPN and RMS in front of equipment that already has a wired or satellite link.
| Model | Ethernet | Wi-Fi | Extras | Choose it when |
|---|---|---|---|---|
| RUT301 | 5 ports, 10/100 | No | 2 digital inputs or outputs, USB | A firewall and VPN router for a machine network |
| RUT142 | 2 ports, 10/100 | Wi-Fi 4 | RS232, built-in DIN rail clip | A serial device behind an existing link |
| RUTX10 | 4 Gigabit | Wi-Fi 5 | Bluetooth LE | Behind a satellite terminal or an NBN service |
The RUTX10 has a good Australian story of its own. SunStore Australia builds off-grid trailers that measure wind at possible wind-farm sites, far beyond mobile coverage. Each trailer pairs a Starlink terminal with a RUTX10, which reads the wind sensors over Modbus, sends the data by MQTT and gives the engineers a way in. Teltonika tells that story on its own site.
Teltonika's support wiki now lists several long-running models as end of life. They keep working, but new projects should start on the current model in the same slot.
| Older model | Current model in the same slot |
|---|---|
| RUT240 | RUT241 |
| RUT950, RUT955 | RUT951, RUT956 |
| RUT300 | RUT301 |
| RUT360 | RUT361 |
| TRB245 | TRB246 |
| TRB255 | TRB256 |
| TRB500 | TRB501 |
A gateway is the right choice when there is exactly one thing to connect. It is smaller, draws less power and costs less than a router, and it runs the same RutOS software.
| Model | Mobile | Connects by | Choose it when |
|---|---|---|---|
| TRB140 | 4G Cat 4 | 1 Gigabit Ethernet port | One Ethernet device: a camera, a PLC, a kiosk PC |
| TRB141 | 4G Cat 1 | Inputs and outputs | Switches, alarms and relays, with no controller at all |
| TRB142 | 4G Cat 1 | RS232 | One serial device |
| TRB145 | 4G Cat 1 | RS485 | A Modbus RTU loop |
| TRB143 | 4G Cat 4 | M-Bus, up to 250 meters | Utility sub-metering |
| TRB160 | 4G Cat 6, 300 Mbps | Gigabit Ethernet, USB-C | One device that needs real speed |
| TRB246 | 4G Cat 4, dual SIM | Ethernet, RS232, RS485, inputs and outputs | A full industrial gateway on a terminal block |
| TRB256 | LTE Cat M1 and NB-IoT, dual SIM | Ethernet, RS232, RS485, inputs and outputs | Low-power networks and deep-coverage sites |
| TRB501 | 5G | 2.5 Gigabit Ethernet | 5G for a single high-speed device |
A modem is simpler again: it has no router inside. It plugs into a USB port and gives the host a mobile connection.
| Model | Mobile | Interface | Choose it when |
|---|---|---|---|
| TRM240 | 4G Cat 1 | USB | A kiosk PC or controller needs a data link |
| TRM250 | LTE Cat M1, NB-IoT | USB | Low-power IoT devices |
| TRM500 | 5G up to 3.4 Gbps, 4G Cat 19 fallback | USB-C, data and power on one cable | 5G for an industrial PC or an existing router |
For makers of equipment there are embedded versions. The EBG140 is a board-level 4G gateway with Gigabit Ethernet that runs RutOS inside another product, and the EBD050 adds 5G to a Raspberry Pi 4 or 5.
Routers rarely have enough ports for a camera site, and never enough power for the cameras. Teltonika's switches and access points fill that gap and appear in RMS beside the router.
| Model | What it is | Ports and power | Choose it when |
|---|---|---|---|
| TSW100 | Unmanaged PoE switch | 5 Gigabit, 4 with PoE+ at up to 30 W each, 120 W in total | Up to four cameras or access points |
| TSW202 | Managed PoE switch | 8 Gigabit plus 2 SFP, PoE+ at 30 W a port | VLANs and fibre on a camera or automation network |
| TSW212 | Managed switch | 8 Gigabit plus 2 SFP | PROFINET, EtherNet/IP and ring redundancy |
| TAP200 | Wi-Fi 5 access point | Gigabit, powered over Ethernet | Coverage in a yard, hall or shop floor |
| TAP400 | Wi-Fi 6 access point | 2.5 Gigabit uplink | Dense Wi-Fi behind a 5G router |

Three points save the most trouble on site.
Mobile antennas are SMA. Wi-Fi antennas are RP-SMA. Teltonika's quick start guides give the mobile and GNSS antennas SMA male plugs and the Wi-Fi antennas RP-SMA male plugs. The two look alike and do not mate, which is deliberate. An external 4G or 5G antenna therefore needs SMA male plugs on its leads, or an adaptor.
Count the mobile ports before you order the antenna. A 4G router such as the RUT956 has two mobile ports. A 5G router such as the RUTX50 or RUTC50 has four, and so does the dual-modem RUTX12. Every port must be fed: a four-port router on a two-port antenna gives away the MIMO gain that 5G depends on.
The power plug is also an alarm input. On most routers the 4-pin power plug carries one digital input and one digital output. A door switch, a tamper loop or a restart relay costs nothing extra to connect, and RutOS can send an SMS or an email when the input changes. The RUT956 adds a DB9 socket for RS232 and a 6-pin socket for RS485. The RUTM55 goes further, with RS232 and RS485 on a 16-pin terminal block beside two digital inputs, an analog input, an open collector output and a relay.
Input voltage is wide, which suits vehicles, solar systems and control panels. The listings we hold show 9 to 30 V DC for the RUT241 and RUT956 and 9 to 50 V DC for the RUTX12, RUTX50 and RUTC50. Check the datasheet of your model before wiring it to a 24 V or 48 V rail.
The antenna decides more of the result than the router does, and the right one depends on where it will be fixed: a steel cabinet, a vehicle roof, a mast. We stock three makers that cover those cases between them. The method for choosing is in our antenna guide; these are the ones used in the projects below.
| Antenna | Ports | Range | Fixing | Where it is used |
|---|---|---|---|---|
| RFI CSM550 | 1: fit one for each mobile port | 698 to 5925 MHz | 50 mm dome, stud mount, IP69 | Police vehicles, where a low profile matters; kiosks, ATMs, ticketing and vending machines |
| RFI CSM700 | 1: fit one for each mobile port | 698 to 3800 MHz, up to 5 dBi | Stud mount through a 16 mm hole, IP65 | Rural fire appliances and utility vehicles; fixed cabinets |
| 2J 2J6984BGFa | 3: 2x2 MIMO cellular and active GNSS | 617 to 5925 MHz | Screw mount, 3 m leads, IP67 and IP69 | Roadside detection units that send real-time alerts; vehicles |
| Poynting PUCK-2 | 2: 2x2 MIMO cellular | 617 to 6000 MHz | Through-hole, 2 m leads | Cabinets and vehicles, in one hole |
| Poynting PUCK-5 | 5: 2 cellular, 2 Wi-Fi, 1 GNSS | 617 to 6000 MHz | Through-hole, 2 m leads | Buses and fleet vehicles |
| Poynting MIMO-4-17 | 7: 4 cellular, 2 Wi-Fi, 1 GNSS | 617 to 7200 MHz | Roof mount, 2 m leads | 5G routers on vehicles |
| Poynting OMNI-402 | 2: 2x2 MIMO cellular | 410 to 3800 MHz | Pole or mast, 2 m leads | Remote cabinets, boats |
| Poynting XPOL-2 | 2: 2x2 MIMO, directional | 617 to 4200 MHz, 11 dBi | Pole mount, 10 m leads | Fringe coverage on 4G routers |
| Poynting XPOL-24 | 4: 4x4 MIMO, directional | 617 to 4200 MHz, 11 dBi | Pole mount, N female ports | Fixed 5G sites |
| Poynting EPNT-2 | 4x4 MIMO cellular and 2x2 MIMO Wi-Fi | 4G and 5G | Wall or pole panel | A 5G router and its Wi-Fi in one housing |
Single-port antennas go on in pairs. The RFI CSM550 and CSM700 have one port each. A 4G router with two mobile ports takes two of them, set apart on the roof, and keeps its MIMO. That is how they are fitted to emergency vehicles: two small domes instead of one large housing, with nothing to catch a branch or a car wash.
Match the leads to the ports. The 2J6984BGFa carries two cellular leads and one GNSS lead in a single screw-mount housing, which is the mobile and GNSS port set of a RUT956, RUTX09 or RUTX11. One hole in the roof, three leads, and every port on the router is fed.
A four-port 5G router wants a four-port antenna. Four separate domes are possible but rarely tidy. On the RUTX50, RUTC50 and RUTM55, use a 4x4 antenna in one housing.
Every router and gateway above runs RutOS, Teltonika's own operating system, which is built on OpenWrt. One interface across the range means a technician who has set up a RUT241 can set up a RUTX50.
RMS, the Remote Management System, is the part of Teltonika that turns a box into a managed service. Each device makes an outbound, encrypted connection to RMS, so it works on ordinary mobile SIMs that have no public IP address. Teltonika states that RMS is hosted on Amazon Web Services.

RMS Management is the fleet view: every device with its status, signal, data use and location, with settings changes, firmware updates and alerts across one device or a thousand. It answers the question that costs the most to answer by car: is the site down, or just the equipment behind it?
RMS Connect reaches what sits behind the router. From a browser you open a device's web page, an SSH session, a remote desktop or a VNC screen, with nothing installed on your computer and no port opened on the site. RedEarth in Queensland uses it to update the controllers inside its battery systems.
RMS VPN builds a private network in the cloud. Routers, laptops and servers join a hub and reach each other as if on one LAN. It suits a monitoring centre that needs a permanent path to many sites.
RMS API gives your own software everything the RMS screens can do. Teltonika publishes a developer portal and a sandbox for it.
Teltonika publishes the model on its RMS page, not a public price list. The model is simple once the two kinds of licence are kept apart.
| Service | How it is licensed | What is free |
|---|---|---|
| Management | Per device: a credit buys 30 days for one device, or a pack covers one device for 3, 5 or 10 years | 30 days for each new device |
| Connect and VPN | By the data that passes through RMS: a credit buys 2 GB for the company, or a pack gives one device 150 GB over 10 years | The first 5 GB for each company |
| API | By the number of requests | 100,000 requests in each 30 days, per company |
Three practical points follow. First, Management is the one almost every fleet needs, and a multi-year pack bought with the router removes a renewal that someone would otherwise forget. Second, Connect and VPN data is used only by your own remote sessions, not by the site's normal traffic, so the free 5 GB lasts a small fleet a long time unless you stream video through it. Third, a device without a Management licence keeps routing: the site stays up and only the cloud view is lost. Some products carry their own allowance, such as the TAP200 access point, which Teltonika lists with 24 months of RMS management.
We do not print prices in articles because they change. We quote RMS credits and packs with the hardware, so the first invoice covers the life of the project.
RMS manages the device. The data from your equipment usually belongs somewhere else, and RutOS can send it there directly. The cloud solutions page of the manual lists these, each installed from the package manager:
| Platform | Maker | What the router does |
|---|---|---|
| Azure IoT Hub | Microsoft | Sends device values or MQTT messages; supports the Device Provisioning Service |
| AWS IoT Core | Amazon | Runs jobs sent from AWS and supports fleet provisioning |
| AWS IoT Greengrass | Amazon | Runs the Greengrass core service on the router |
| Cumulocity | Cumulocity | Reports to a Cumulocity tenant over MQTT |
| ThingWorx | PTC | Reports mobile network values to a ThingWorx server |
| Cloud of Things | Deutsche Telekom | Registers the device for monitoring and control |
For any other platform, the Data to Server and MQTT functions publish Modbus readings, input states and GNSS positions to a broker or an HTTPS address of your choice. That covers most SCADA systems and the dashboards that grew up around MQTT.
Teltonika publishes a certification page for each model on its support wiki. These are the entries on the pages we read for six models in November 2026.
| Model | Europe | UK | Australia and NZ | North America | Carrier approvals listed |
|---|---|---|---|---|---|
| RUT241 | CE (RED) | UKCA | RCM | FCC, IC, PTCRB | AT&T, Verizon, T-Mobile, UScellular |
| RUT956 | CE (RED) | UKCA | RCM | FCC, IC, PTCRB | AT&T, FirstNet, Verizon, T-Mobile |
| RUTX50 | CE (RED) | UKCA | RCM | None listed | None for these regions |
| RUTC50 | CE (RED) | UKCA | RCM | None listed | None listed |
| RUTM55 | CE (RED) | UKCA | RCM | None listed | None listed |
| TRB141 | CE (RED) | UKCA | RCM | None listed | Deutsche Telekom |
Read the table the way an engineer would. The six all list the RCM, the mark for Australia and New Zealand. The US picture differs by model: the RUT241 and RUT956 list FCC and the big US carriers, while the pages for the 5G models above list no North American approval. A project that ships to several countries should be specified model by model, not by family.
For the RCM, Teltonika's RUT241 page names the standards behind the mark: AS/NZS CISPR 32 for emissions, AS/NZS 4268 for the Wi-Fi radio, AS/NZS 2772.2 for human exposure, AS/NZS 62368.1 for electrical safety and AS/CA S042 for connection to the mobile network. Those are the same standards we check when we assess a wireless product for import, so the paperwork is the kind a buyer's auditor expects. The pages for the RUT241, RUT956 and RUTX50 also list a software security declaration for RutOS, and the RUTX50's lists ETSI EN 303 645, a European security standard for connected consumer devices.
One caution for anyone importing directly. In Australia the legal duty sits with the Australian supplier, who must hold the evidence and stand behind the label. Buying from an Australian supplier means that work is already done. If you bring in equipment yourself, our ACMA and EESS compliance desk can check it before it ships.
Product pages say what a router can do. These are projects Teltonika has published, with the customer named where it is.
| Who and where | Product | What the router does there |
|---|---|---|
| RedEarth, Australia | RUT241, RMS Connect | Connects battery storage systems in rural areas; engineers update the controllers remotely |
| TerraVision, Australia | RUT956 | Runs TerraVision's own software to start and stop generators, pumps and lighting at mines |
| Hermes & Soteria, Australia | RUT956 | Carries sensor data from tailings dams to a cloud monitoring system, on two SIMs |
| SunStore, Australia | RUTX10 with Starlink | Links wind sensors in off-grid trailers to a central server |
| LEC, United States | RUT956 | Sends sewage lift station alarms over the FirstNet public safety network |
| Postbus and Unwired Networks, Austria | RUT956 | Keeps the buses of Austria's largest bus company connected to their management cloud |
| Goodyear, Luxembourg | RUT951 | Connects a system that predicts tyre maintenance |
| Passenger trains, Europe | RUTX11 | On-board connectivity, certified to the EN 45545-2 rail fire standard |
| LTP Streaming | RUTX12 with Bondix | Bonds mobile links for a multi-camera live stream from a rural venue |
| Sea freight port | RUTX50 | 5G with load balancing and channel bonding for port operations |
| Property sub-metering | TRB143 | Reads up to 250 M-Bus meters and sends the data over 4G |
| First responders | RUTM52 | Two 5G modems keep vehicles connected in poor coverage |
The four Australian stories are linked. The others are in Teltonika's use case catalogue. The pattern across them is consistent: a small router, the customer's own equipment behind it, two SIMs or two links for resilience, and RMS so that nobody drives to site to press a button.
The TerraVision project shows how far the platform stretches. The RUT956 there is not only a modem. Its inputs and outputs switch relays, and the customer's own application, built with Teltonika's development kit, runs on the router and decides when a generator starts. One device replaces a modem, a small controller and the wiring between them.
Artificial intelligence has changed what sits behind the router more than the router itself. Three changes matter.
The camera has become a sensor. A vision model turns pictures into events: a number plate, a person in a danger zone, a queue that is too long. Running the model beside the camera means only the result travels, a few hundred bytes instead of a video stream. That makes 4G workable for jobs that once needed fibre, and it makes the router's serial port and relay useful again, because the site can act on a detection without waiting for the cloud. Teltonika's own drawings now show AI cameras behind its routers at traffic lights in Colombia.
Models need feeding and updating. A model in the field drifts unless it is retrained, so sample pictures go up and new model files come down. That is a burst of upload, then a burst of download, which is the traffic 5G handles best. The RUTC50's larger memory and Wi-Fi 6, and the 2.5 Gigabit port of the TRB501, are aimed at this kind of site.
Software now manages software. An AI agent or a script can watch a fleet as well as a person can, if it has an interface. The RMS API is that interface: device status, signal history, configuration and remote access, with 100,000 requests free every 30 days. The same goes for the data path, since Azure IoT Hub and AWS IoT Core, both supported in RutOS, are where most teams already train and host their models.
For developers, the EBD050 puts 5G on a Raspberry Pi, a common host for small vision models, and the EBG140 builds a RutOS gateway into a product. Projects 7 and 8 below draw two such sites in full.
Each drawing shows the equipment on site, the router with the ports used, the antenna, and where the data goes. The antennas are from the Poynting, RFI and 2J ranges we stock. Treat each as a starting design: signal strength, cable lengths and the carrier at your site will change the details.

A machine in a shopping centre or on a railway platform has power and nothing else. The RUT241 fits behind the coin mechanism, takes two Ethernet devices and uses its input and output for the door alarm and a remote restart.
| Part | Choice | Why |
|---|---|---|
| Router | Teltonika RUT241 | Small, two Ethernet ports, eSIM profiles, input and output on the power plug |
| Antennas | Two RFI CSM550 | One for each mobile port; a 50 mm dome rated IP69, made for kiosks, ticketing and vending machines |
| One hole instead of two | Poynting PUCK-2 | Two cellular leads in one through-hole housing |
| Mounting | DIN rail kit or surface clip | Fixes the router beside the controller |
| Cloud | RMS Management and RMS Connect | Fleet status, firmware, and a way into the controller |
The stock antennas work on a desk and fail inside a steel cabinet, which is a Faraday cage. Moving the antenna outside the metal is the single biggest improvement on this kind of job.

Video is the reverse of most internet use: nearly all of it is upload. A site's upload speed depends on signal quality far more than download does, so this is the project where a directional antenna on a mast earns its place.
| Part | Choice | Why |
|---|---|---|
| Router | Teltonika RUTX50 | 5G with 4G Cat 20 fallback, two SIMs, five Gigabit ports |
| Switch | Teltonika TSW100 | Powers up to four cameras, 30 W a port, 120 W in total |
| Antenna | Poynting XPOL-24 | 4x4 MIMO, 11 dBi, four ports for the router's four |
| Cloud | RMS VPN or RMS Connect | A private path to the recorder; no public IP on the site |
Record at full quality on site and send a lower-rate stream to the monitoring centre. The link then carries what an operator needs to see, and the evidence is on the recorder when it is wanted.

Teltonika names the RUT956 for exactly this: ticket machines, passenger counting and vehicle tracking. Austria's Postbus fleet is the published example.
| Part | Choice | Why |
|---|---|---|
| Router | Teltonika RUT956 | Dual SIM, serial ports, GNSS, inputs and outputs, vehicle-friendly supply range |
| Antenna | Poynting PUCK-5 | Cellular, Wi-Fi and GNSS in one housing and one roof hole |
| Cloud | Fleet platform, RMS Management | Positions and fares to the operator; the routers managed as one fleet |
For passenger Wi-Fi, step up to the RUTX11, which Teltonika lists as certified to the EN 45545-2 rail standard, or to the RUTX50 on 5G routes. Before ordering a combined antenna, check which plug each lead carries: the router's Wi-Fi ports are RP-SMA.

A patrol car or a fire appliance works where coverage is poorest and cannot stop to fix its connection. The design answer is two carriers, external antennas, and nothing on the roof that stands tall enough to be knocked off.
| Part | Choice | Why |
|---|---|---|
| Router | Teltonika RUTX11 | Dual SIM, four Gigabit ports, Wi-Fi around the vehicle, GNSS |
| Antennas | Two RFI CSM700 | One for each mobile port; compact, up to 5 dBi, stud mount |
| Lowest profile | Two RFI CSM550 | A 50 mm dome that barely shows on a roof |
| One housing | 2J 2J6984BGFa | Two cellular leads and GNSS through a single hole |
| Cloud | The agency's systems over a VPN, RMS Management | A private path to dispatch and records; the fleet on one screen |
Compact antennas of exactly this kind are fitted to police vehicles and rural fire appliances in Australia. On a fire appliance the example is the CSM700; on a patrol car it is the smaller CSM550, which hardly shows.

A live cross has no second take. The design aim is not peak speed but a floor: enough upload, all the time, for the length of the broadcast.
| Part | Choice | Why |
|---|---|---|
| Router | Teltonika RUTC50 | 5G, two SIMs plus eSIM to choose the best carrier at each venue, Wi-Fi 6 for the crew |
| Two carriers at once | Teltonika RUTX12 | Two 4G modems connected together; the base for bonded streaming |
| Antenna | Poynting MIMO-4-17 | Four cellular leads for 4x4 MIMO, plus Wi-Fi and GNSS |
| Cloud | Bonding or ingest server | SRT or RTMP into the studio |
Bonding deserves a plain explanation. Failover moves the stream to another link after the first one fails, and viewers see the gap. Bonding sends the stream over several links at once and reassembles it, so the loss of one link is invisible. Teltonika's published streaming projects pair the RUTX12 with bonding software from Bondix for this reason. On 5G, the RUTM52 carries two 5G modems for the same purpose.

This is the classic industrial job, and three of the Australian projects in the table above are versions of it.
| Part | Choice | Why |
|---|---|---|
| Router | Teltonika RUT956 | RS485 for Modbus, inputs and outputs, dual SIM, 9 to 30 V DC |
| Smaller sites | TRB141, TRB142 | Inputs and outputs only, or one RS232 device |
| Antenna | Poynting OMNI-402 | 2x2 MIMO in a sealed housing, SMA male leads |
| Fringe coverage | Poynting XPOL-2 | Directional 2x2 MIMO with 10 m leads |
| Cloud | SCADA or an IoT platform, RMS Connect | Data by MQTT or Modbus TCP; engineers reach the PLC from the office |
Where there is no mobile coverage at all, the same design works behind a satellite terminal with a RUTX10, as SunStore's wind trailers show. Where there is weak coverage, fit the satellite link and the mobile router together and let RutOS fail over between them.

| Part | Choice | Why |
|---|---|---|
| Router | Teltonika RUTM55 | 5G with serial ports, isolated inputs and a relay in one unit |
| Switch | Teltonika TSW100 | Powers the cameras |
| Antenna | Poynting EPNT-2 | 4x4 MIMO for 4G and 5G with Wi-Fi in the same panel |
| Cloud | AI platform, RMS VPN, RMS API | Results out, models in, engineers and scripts with a way to the edge computer |
The relay matters more than it looks. A barrier that closes or a beacon that lights within a fraction of a second of a detection cannot depend on a round trip to a data centre. Keeping the decision and the action on site, and using the mobile link for reporting, is what makes these systems dependable.

A transportable camera unit is the edge AI idea taken outdoors. It is parked, moved, and parked again, so it has to find its own position and stay online on whichever carrier is best at each spot.
| Part | Choice | Why |
|---|---|---|
| Router | Teltonika RUTX11 | Two mobile ports and GNSS, dual SIM, Gigabit ports for the computer and cameras |
| Antenna | 2J 2J6984BGFa | 2x2 MIMO cellular and active GNSS in one sealed housing; three leads for three ports |
| Switch | Teltonika TSW100 | Powers the cameras |
| Cloud | Alert service, evidence store, RMS Management | Alerts at once; images when the link allows; every unit's location and health |
Antennas of this type are used on roadside detection units that send alerts in real time to officers' phones and in-car devices. Because the model runs in the unit, the mobile link carries a small alert, not a video stream, and 4G is enough. Where the images must follow at once, fit a 5G router and a four-port antenna instead.
| If the job is | Start with |
|---|---|
| One machine in a cabinet | RUT241 |
| A PLC, meter or sign on a serial port | RUT956, or TRB142 and TRB145 for a single device |
| Switches and alarms only, no controller | TRB141 |
| A bus or service vehicle | RUT956, or RUTX11 for passenger Wi-Fi |
| An emergency vehicle or a roadside unit | RUTX11 |
| A site with cameras | RUTX50 with a TSW100 |
| Two carriers at the same time | RUTX12 |
| Many Wi-Fi users on 5G | RUTC50 |
| 5G in a control panel | RUTM55 |
| A rack beside the fibre | RUTXR1 |
| No mobile coverage: satellite or fixed line | RUTX10 |
| One PC or kiosk | TRM240, or TRM500 for 5G |
The whole range we stock is in the Teltonika collection, and the antennas are in the Poynting, RFI and 2J collections.
A router shares one mobile connection among several devices and usually adds Wi-Fi. A gateway connects a single device through one Ethernet port, a serial port or a set of inputs and outputs. A modem has no routing at all: it gives the computer it is plugged into a mobile connection. Routers and gateways run RutOS and appear in RMS.
In Lithuania, in the European Union. The Teltonika group states that its products are designed in Lithuania and built in its own factories in Vilnius and Molėtai.
The certification pages we read for the RUT241, RUT956, RUTX50, RUTC50, RUTM55 and TRB141 all list the RCM. Check the page for the exact model and order code you plan to buy, because approvals are granted model by model.
Not to use the router. A router works without RMS. Each new device gets 30 days of RMS Management free, each company gets 5 GB of Connect and VPN data free, and after that Management is licensed per device by credits or multi-year packs.
For a site, the RUTX50. For many Wi-Fi users or heavier software on the router, the RUTC50. For a control panel with serial equipment, the RUTM55. All three fall back to 4G where there is no 5G. The antenna matters as much as the router, and a 5G router needs four antenna feeds.
Yes. An Ethernet router such as the RUTX10 sits behind the satellite terminal and adds a firewall, VPN, remote management and industrial protocols. A mobile router can also use the satellite link as its wired WAN and switch to 4G or 5G when the dish is obstructed, or the other way round.
SMA for the mobile and GNSS ports and RP-SMA for Wi-Fi. External mobile antennas need SMA male plugs. Count the router's mobile ports first: two on most 4G models, four on 5G and dual-modem models.
Teltonika lists the RUT240, RUT950, RUT955, RUT300, RUT360, TRB245, TRB255 and TRB500 among its end-of-life products. They keep working. For new projects use the current model in the same slot, shown in the table above.
Send us what sits on site (each device and how it connects), the supply voltage, whether the site is fixed or moving, the carrier or carriers you can use, and how many sites there are. We will come back with the router or gateway, the antenna and cable for the signal you have, the mounting parts and the RMS licences, as one quote. If the equipment behind the router is your own product and it is headed for the Australian market, tell us that too: we can check its compliance at the same time.
The manufacturer pages linked in this article were read on 15 November 2026. Specifications and approvals change, so check the current datasheet and certificate for the exact model before you order.