Stay updated on tech trends, product launches and exclusive offers! Read our Policy Policy.
Cellular Components
Explore essential cellular components including splitters, couplers, and surge protectors. Designed to optimize signal systems and network infrastructure.
RFI Power Dividers / Combiners are used in a variety of RF power dividing and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input, port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
RFI Power Dividers / Combiners are used in a variety of RF power dividing and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input, port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
These 4-way devices may be used in a range of GPS/GNSS signal splitting applications and are designed to split source RF power into an equal ratio of power outputs. The slitter can pass DC current which makes it suitable for use with active GPS/GNSS antennas. Multiple GPS/GNSS devices can share a single antenna using this splitter. Their compact size and ease of installation suits a wide range of deployment scenarios
RFI Power Dividers / Combiners are used in a variety of RF power dividing and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input, port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
RFI Power Dividers / Combiners are used in a variety of RF power dividing and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input, port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
RFI Power Dividers / Combiners are used in a variety of RF power dividing and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input, port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
RFI Power Dividers / Combiners are used in a variety of RF power dividing and combining applications. Designed using Wilkinson or N-way styled cascaded broadband binary power splitting or combining techniques offering broadband capability with good splitter output / combiner input and port-to-port isolation. Manufactured using a robust low profiled solid milled aluminium housing these products are ideal for use in coaxial cable networks and multicoupling applications.
CommScope T-50-DMI6 is a high-quality 50W Low PIM Termination Load designed for use in demanding RF environments. It is operating across a broad frequency range of 555 to 2700 MHz.
CommScope T-10-UW-43-F-16 Termination Load is a high-performance termination device designed for RF applications within the 340-6000 MHz frequency range.
CommScope T-10-UW-43-M-I6 Termination Load is a high-performance termination device designed for RF applications within the 340-6000 MHz frequency range.
CommScope T-100-DFI6 is a high-performance 100W Low PIM Termination Load designed to deliver exceptional reliability and signal integrity in RF applications. Operating across the 555 to 2700 MHz frequency range, this termination load is used where low PIM is critical.
CommScope T-100-DMI6 is a premium 100W Low PIM Termination Load engineered for use in high-performance RF systems. Operating across a broad frequency range of 555 to 2700 MHz, this device provides stable and reliable termination with minimal signal interference.
CommScope T-10-UW-NMI6 Low PIM Termination Load is a high-performance termination device designed for RF applications within the 340-6000 MHz frequency range.
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
RF Loads and Terminations are used to properly terminate active RF devices, coaxial cables, unused ports, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
RFI 4.3-10 RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 3800MHz, suitable for use in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments.
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
RF Loads and Terminations are used to terminate coaxial cables, multicoupling devices and with test equipment. RF Terminating Loads are primarily used in multi-coupling, distributed antenna, radiating cable systems and laboratory test environments. RFI has a wide range of coaxial 50 Ohm resistive termination loads in various connector types, power ratings and frequency range DC - 2500 MHz. The heat-sinks have a high thermal density and their surface area is cooled using natural convection.
These 50 Ohm terminations are specifically designed to terminate unused ports on low power devices (such as receiver distribution systems) and help ensure optimum shielding and the lowest system noise figures.
RFI Power Dividers / Combiners are used in a variety of RF power dividing and combining applications. Typically used in DAS (Distributed Antenna Systems) for distributing power throughout feeder cable networks. RFI provide a three power dividing - combining options covering the most popular frequency bands which provide solutions for feeder cable and antenna networks.
