111ST is a unity gain omni-directional antenna manufactured by RFI for mobile applications. This antenna operate on 66-175 MHz frequency range, is very affordable and provides excellent performance.
The RFI 4DS-100 Twin Double Sheath DC Cable is designed for reliable performance. This 100-meter roll of DC cable boasts a 4 mm overall diameter and features a conductor with a 1.85 mm² nominal area, making it an ideal choice for various applications.
These low cost horn speakers are an all-aluminium construction and are suitable for indoor or outdoor application including PA systems, CB extension speaker or alarms etc.
These low cost horn speakers are an all-aluminium construction and are suitable for indoor or outdoor application including PA systems, CB extension speaker or alarms etc.
RFI's 800 MHz Bi-Directional Amplifier (BDA) is a compact IP-rated wall or pole mountable, RF-transparent repeater. The BDA is ideal for rebroadcasting RF coverage in confined areas such as in tunnels and mining sites as well as remote locations.
RFI's VHF Bi-Directional Amplifiers (BDA) are compact IP-rated wall mountable, RF-transparent band selective repeaters. The BDA is ideal for rebroadcasting RF coverage in confined areas such as in tunnels and mining sites as well as remote locations.
The AMC series of rebroadcast equipment consists of a multi-channel head end and RF power amplifiers that can provide AM rebroadcast through catenary wire, radiating cable or antenna RF distribution systems. The AMC516A is a multi-channel head end unit. It features multiple off-air antenna capability for diversity reception, two pairs of RF outputs for connection to external RF power Amplifiers (PA516 models) for multi-bore or multi-zone tunnel applications, break-in audio message interface, and status monitoring and alarm outputs. The AMC516A may be expanded up to 16 channels in a compact 2RU 19inch rack mount enclosure. Multiple AMC516A units may be implemented in a rebroadcast system design to cater for multiple off-air signal reception locations, redundancy, or for capacities greater than 16 channels.
The AMC series of rebroadcast equipment consists of a multi-channel head end and RF power amplifiers that can provide AM rebroadcast through catenary wire, radiating cable or antenna RF distribution systems. The AMC516A is a multi-channel head end unit. It features multiple off-air antenna capability for diversity reception, two pairs of RF outputs for connection to external RF power Amplifiers (PA516 models) for multi-bore or multi-zone tunnel applications, break-in audio message interface, and status monitoring and alarm outputs. The AMC516A may be expanded up to 16 channels in a compact 2RU 19inch rack mount enclosure. Multiple AMC516A units may be implemented in a rebroadcast system design to cater for multiple off-air signal reception locations, redundancy, or for capacities greater than 16 channels.
The AMC series of rebroadcast equipment consists of a multi-channel head end and RF power amplifiers that can provide AM rebroadcast through catenary wire, radiating cable or antenna RF distribution systems. The AMC516A is a multi-channel head end unit. It features multiple off-air antenna capability for diversity reception, two pairs of RF outputs for connection to external RF power Amplifiers (PA516 models) for multi-bore or multi-zone tunnel applications, break-in audio message interface, and status monitoring and alarm outputs. The AMC516A may be expanded up to 16 channels in a compact 2RU 19inch rack mount enclosure. Multiple AMC516A units may be implemented in a rebroadcast system design to cater for multiple off-air signal reception locations, redundancy, or for capacities greater than 16 channels.
The RFI ANT-2.4-S-SMA-RP WiFi Terminal Antenna is designed for 2.4-2.5GHz omni-directional microstrip, which is terminated with reverse polarity SMA male connector. It's easy installation of connector direct mount design. Itis ideal for IEEE802.11b/g/n wireless communication applications. It is IP65 waterproof rated.
This hinged terminal antenna from RFI supports 5G and 4G cellular technologies. It's hinged swivel design allows the antenna to be positioned in a straight, right, or 45-degree angle so it can be rotated into the direction with the most signal strength and reduce interference with other antennas nearby.
MPN: ANT-5G-SMA-B
The RFI ANT-LTE-S-SMA Cellular Antenna is an ultra-wide band high performance connector mount antenna solution for worldwide 4G LTE with 2G, 3G fallback compatibility, covering all cellular bands ranging from 698-960, 1710-2170 and 2500-2700 MHz.
The RFI ANT-LTE-SMA-B is a high-performance, ultra-wideband LTE terminal antenna designed for global 4G LTE connectivity with 2G and 3G fallback. Covering all major cellular bands from 698 to 2700 MHz, this antenna ensures stable, high-throughput data performance for a wide range of wireless devices.
The RFI ANT-LTE-SMA-W is a white variant of the ultra-wideband LTE terminal antenna, offering the same high-performance connectivity across global 4G LTE bands with 2G/3G fallback. Designed for flexibility and reliability, it is ideal for a wide range of wireless communication devices.
